Search results

  1. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    You should erase fault memory, road test the vehicle and read engine ECU for any faults again.Everything should be ok best regards
  2. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    Hi . My EGR is 03l131501e and It is different . Before replacing your EGR try cleaning from the soot Unscrew the plastic cover and see if there are broken teeth on wheels. I often clean the Egr and if teeth are not damaged the problem persists. Also check whether the aluminum pipe from egr...
  3. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    Hi. I'm sorry I did not have time today. 'll I check the EGR tomorrow and I'll give you the answer.
  4. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    I think that I have a used EGR, I'll check tomorrow at work . Good night ps:EGR system for engin code BRE is different ,check Your engine code again .{Sticker on the first page of the service book}
  5. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    Hi. What is the code of your engine? And what is the number of your EGR?
  6. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    Any incorrect operation of the turbine is stored in the ECU memory. Enter the code of your engine, I'll give you details of how to check turbo and Air Flow Meter . AFM can cause a drop in engine power without saving any errors in the engine control unit.
  7. C

    ECU - Adaptation with VCDS?

    You're right, but immo is no perfect protection, the thief can disable it with the same program as you through the diagnostic socket in 15 secund: -} The best are hidden switches and cut off power for diagnostic socket in the car.
  8. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    In The throttle is an electric motor V157, they often break down. Mostly are blocked and cause a burning fuse SA 12. repair is not possible to just replace it. You do not need to buy the Audi, it unit is the same in vw, seat, skoda. THROTTLE BODY 1.9 2.0 88.054 03G128063C 03G128061A...
  9. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    ok:-} First check Engine ECU for any faults ,if no faults do not do nothing.
  10. C

    EML On - V157 Motor Manifold Intake Flap - Intermittent Fault P3103

    Hi. 1 - 22 Nm 2 - Lifting eye 3 - 22 Nm q Tighten in stages and in diagonal sequence 4 - Gasket q Renew 5 - Intake manifold q Illustration shows intake manifold without change-over flap q Removing and installing → Chapter 6 - Bracket q For wiring...
  11. C

    ECU - Adaptation with VCDS?

    I Understand . It is very difficult to check., I installed a secondary power switch , cutting off the current from the main relay to engine ECU or in all audi and vw the best is cut of electrical wire from stering wheel control unit to onboard control unit . When you turn the key in...
  12. C

    ECU - Adaptation with VCDS?

    Ask someone from chip tuning to turn off immo in the engine control unit. VAG EDC16 immobilizer bypass utility www.Abritus72.com Pin code for audi also is easy to read ,but too expensive software. ABRITES VAG Commander 6.6http://abritus72.com/vagcommander.html
  13. C

    Cluster language and airbag light

    check faults in adres 15 Airbag ECU .
  14. C

    Cluster language and airbag light

    Do your instrument cluster is working properly? Do you need change language and reset airbag lights ? VCDS Can't reprogram,upgrade ,change software .
  15. C

    Cluster language and airbag light

    {Scan also says module incorrect vin} do scan seys incorrect vin in Airbag ecu? If yes you can adapt airbag ecu Channel 081: Vehicle Data LearningTo start the process for vehicle data (VIN) learning, enter/save 02905 as new value. Audi A4 (8E) Airbag 9.41 - Ross-Tech Wiki language versions also...
  16. C

    Cluster language and airbag light

    What is the year of your car and engine code?
  17. C

    Fault Found: 01539 - Headlights Not Adjusted [urgent]

    [Select] [55 - Xenon Range] (For some newer vehicles, use [29 - Left Light] instead ) [Basic Settings - 04] Group 001 [Go!] after manual adjusting DO NOT CHANGE FOR CHANEL 2 select - SAVE wait and must be message learned
  18. C

    Oil Level sensor Problem

    A - Engine control unit -J623- B - 94-pin connector -T94- C - 60-pin​​ connector​ -T60- When the ignition is on or the engine is running at pin 1 must be a voltage of 12 volts If no 12 volts check fuse sb2. if fuse sb2 ok and still no 12 wolts in wire pin 1 ,check wire for...
  19. C

    Oil Level sensor Problem

    "4640 Engine oil Temp. Sensor (G8) : Signal Too Low" In Your car , Engine Oil level and oil temperature sender is name G266. Wire for g266 oil level and temperature sender. Pin 1{red/blue} = fuse SB2 pin 2[br] = ground pin3 [green/yellow] = Engine control unit...
  20. C

    Oil Level sensor Problem

    When the belt in 3 liter engines audi gets oil very quickly is frayed and cause a lot of damage. What is your Car year and Engine code?
Top