i need doors panel with good condition for my car cant find in my country they are very rare now days, i have 1.8t 98 for 12 years i want to keep
if someone is selling or breaking ther cars please contact me
i have 98 agu with k04 , im going to put a big turbo like gt2871
what better to go with emerald k3 plug and play kit or me7 .5conversion
i have already full engine and lamda loom ecu cluster and gas pedal with the sensor maf coolant from aum car , but im afarid to end up with a car that deos...
i have very weird problem
cant connect to any controller with vcds or vag com
though in the test it shows ok and interface found
iv been using it for 4 years with no problem/
i tried today vw tool very old software and it connects and work just fine.
and vag commander works fine
so far tried 2...
i just did a log after i replaced the n75 with mbc and increased the boost to 1.6bar(was 1.4 with n75)
i have alot of knocks why is that ?with n75 i have zero in all 4 cly
its only 0.2 bar more
the car feels stronger and run perfect .
is this too risk to drive?
the car vr6 maf
what do you think ?
after some searchs cant decide if its ok or not
i also have a smoke problem after stay at idle for 5-10min and then drive a big puff white smoke with oil smell
and then disappear i think this a turbo
no coolant loss
and oil seems stable too.
deos the vr6 maf sensor works on an agu engine?
i bought a complete vr6 mk3 maf sensor and housing can i use with out replacing the sensors?
they has same connection .
and the car is tuned for vr6 maf,
1.8t agu 98
i want to replace my two knock sensors becuase they are cracked
i found two thats look just the same ( i have green and black )only the length is longer
deos this matter?
I have k03 hybrid with stock maf and fuel injectors and 4 bar fpr with custom software which I did 3 years ago max.
if I upgrade the maf housing to 3" and the fuel injectors to the saab red 360cc do I need new software?
its 1.8t agu
I have a3 agu 98 me3.8.3 . I want to install the newer ecu .
I dont want vvt and n249 .
What parts i need?
Any aum ecu
New style coils
What else ?
Do i need to change the interior loom too?
here is the sound
only happens when turning left , when turning right their is no sound.
the steering wheel fluid is between min and max
I think its something in front control arm bushs
or what it can be?
the car 1.8t agu
I have 98 1.8t agu without the lcd in the center but when I log into vag com I can see the speed and fuel economy,
can I replace mine with this one AUDI A3 1.6 AUTO 1999 INSTRUMENT CLUSTER SPEEDO CLOCKS 8L0919930HX | eBay ?
deos someone know what is the flow rate of this injectors red 315cc with 4 bar fpr
30lbs/hr Red Devil - Custom, Flow-Matched - Fuel Injectors MOD Sets - Siemens Injectors & Lucas Injectors - Racing Fuel Injector Sets - 0280155759 - Red Devil 30lb
I have a few questions about this thing
the system already installed on the car only the nozzle is not.
before i fit the nozzle do I need to clean the intake manifold? because from what I see methanol "cleans" the intake and I don't want some old stuck dirt to get to the engine am I right?
well suddenly my obd port is not working,
when i connect the obd port to the pc i hear the sound that its connected but cant read .
and the led function the controller not lighting also i tried two cables.