Taken a photo of it to demonstrate what im going on about. This is a photo of the linkage on my golf as its the same, but easier to see. The...
The gearstick in my S3 isnt going back to centre when i push it from one side to the other. Ive looked at the linkages at the gearbox ends and it...
Thanks prawn! Oh yeah that crappy old thing lol, i don't get involved in turning, milling ftw :). Sold my disco now and got a mk4 gt tdi as a...
So little update. Got the Audi mot'd on Saturday ready for the nice weather we will hopefully be getting! Developed a misfire at full boost -...
Well that was easy. Coil pack no.3 :).
Ah also, when i had my stage 2 at r tech niki said the MAF was a little oily, another possibility?
Hey errybody, hope you're all enjoying this not so bad weather. Car hasn't been used properly in a good 2/3 months (i don't drive it in the...
Got my s3 mot'd : D! Bring on the summer!!
Did you have the seal already over the piston? If so its pretty much impossible to do! Make sure the undercut in the caliper is clean as they...
Ill elaborate a bit on that as that's a bit vague... Pretty sure this is how I did it... Fit the seal inside the caliper, then using some brake...
It's a bit of a fiddle! If I remember correctly you have to get the seal seated inside calliper before stretching the seal over the piston....
Got this from Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit... Speedo error 10.16% Reading...
Your speedo will read slightly faster than your actual speed, but other than that it'll be 'reet!
Jealous!! I'd love to build a car like this. Going to keep my eye on this one :)!
Break it. Make them go up in value for us keeping them :). If the bodywork is quite bad then you probably are better off breaking it to be fair.
I can't really remember specific problems that people have had, but it basically runs down the same lines as what Sam is saying, all they want is...
I dont live that far from TSR, and so i know a lot of people who have used TSR performance... I hear that they used to be very good. But recently...
Put the boost gauge in, fairly happy with the colour, perhaps a little too pale, but fine for now. [IMG] Before and after [IMG] Thanks for the...
Ohhhh dang! One of those pictures is like heatsheilds on heatsheilds! Looks like youre well prepared for the extra heat :)! Fantasic work, looking...
Can't be bothered to look back through the thread as I haven't looked at this thread for a while, but I like what I see on this page!
Separate names with a comma.
