If the jet gets blocked the pressure builds up and the seal fails, filling the internals with water. Open your rear hatch up and look for brown...
Nice post, thanks.
Mine is exactly the same, creaking on lock when slow or stationary. How do I check what this is? Shine a torch in the arch while someone goes lock...
Not bad for a 2010 1.8 TFSI. New coil packs (Bosch - standard) New plugs (NGK - standard) K&N air filter Everything else stock. [ATTACH]
[MEDIA]
Was it that easy? I think I need to do it too. Thanks.
My little window triangles have bubbles too but they're not cheap to replace. I was thinking about rubbing them down and 3M gloss wrapping them
[ATTACH]
Do you use Halfords screen wash? My washer jet blocked, back pressure built up, blew past the inner seal and soaked the control PCB. I had to...
So is the boost byte 000062?
I only discovered it about 18 months ago. I binge watched it one rainy Sunday to catch up and I've been eagerly awaiting each episode ever since....
I only have a non standard grille and I mentioned this to my insurance company and they seemed a bit confused that I would even mention something...
Seen all the Binky's, best series on YouTube.
True. I'm just a bit @nal, I like to know why things are the way they are.
Thanks, I'll give that a go. My only concern was that I'd be changing the coding for the wrong module as the Country code was the only value that...
Hi, I'm using a XTool VAG401 to code my dashboard to remove the seatbelt warning but my current coding doesn't seem to tally up with Ross-Tech...
Thank you.
Thanks for that, I found a cheap cluster and just assumed it would be straight forward with VCDS. I found ECU Testing with a Google search last...
Thanks very much. Any idea of cost to recode?
Seems quite common. I'm going to check the steering rack connections then maybe the cluster PCB then I might pull the fuses one by one and see if...
Separate names with a comma.
