Rodders, There's some details on the VCDS website regarding resetting of service intervals:...
You can find details of the problem and potential fixes for this fault code on the Ross Tech Wiki:...
The Instruments don't use long coding, here's the relevant page from the Ross Tech website that details the options available: Audi A3 (8P)...
I find this site quite useful for identifying modules and the relevant options/coding: Audi Portal: ECU Diagnostic . Audi A3 8P (2003- ) ....
There's some details here that may help answer your questions: Roof Remote Operation... - A5_OC
David, Don't give up, there's plenty help available on here :yes: Can you give us some details on your car and perhaps post an extract of the...
David, The scan results (if you saved them) will list the modules that are fitted to your car, or alternatively, run an Autoscan and click on...
Why not just code the module correctly? 01044 - Ross-Tech Wiki
Monkey The scan shows this is an intermittent fault, so you may not see the issue all of the time. There should be no need to drive the car, just...
Some details on the fault here: 01521 - Ross-Tech Wiki You need to refer to the Measuring Blocks to identify the faulty sensor. Steve
Could you post an autoscan so that we can see the modules that are available in your car? This information might allow people to see what your...
Can you post a diagnostic scan of your car to show the current coding for module 09 Hopefully we can then advise what needs to be changed. Steve
VCDS-Lite shareware: Ross-Tech: VCDS-Lite: Download
Chris, The gauge sweep is standard for the S3, but I think this is hard coded into the instrument cluster rather than it being a setting change,...
Chris, As far as I know the Instruments don't use long coding for the 8P. As you have seen the CAN gateway along with the Central Electronics and...
Neil, This will hopefully be of use, it's not my car but an extract of a scan that I picked up from the A1 Forum to assist me in comparing coding...
Details on both of these features and probably a few more that you'll want to consider can be found here: The Audi A1 Forum :: View topic - HOW...
Ken, I came across this site recently, it's a really useful source of info on VAG cars: ElsaWeb - Removing and installing fuse holder BSB in...
Ken, I'd check the fuse as it's quite possible that the feed wire shorted out when the cable was damaged. (I believe this was also suggested in...
Chris, I believe it will work but you need to run 'Boot Camp', see item 1.8: Ross-Tech: FAQ Page 1 Steve
Separate names with a comma.
