Hi buddy, I’m sorry I can’t help with your issue but I have the exact same problem with my Bosch 1000cc’s. Usually on WOT but intermittently over...
Great info :thumbs up: this is something I’ve been lookig to do for a while, thanks for sharing
I had one from IWS Developments, 63mm, fits nice and snug with no alterations needed to battery tray...
Legend mate, Thank you :)
I’m looking for some information on which 2.0T FSI crankshaft to buy for my build. I’m a little bit confused and keep getting conflicting...
I don’t think there’s any issue with not having them in, they’re really just to keep the disk in position and make it easier to align all the...
They’re terrible at replying to emails. I’ve messaged them many times in the past in both English and German but they just don’t ever respond
Stick with 3” if you’re planning on going BT in the future. I have the Zinram on mine which works and sounds great. I’ve got a few vids of it on...
This pic shows it a little better [ATTACH]
Could someone please have a look at these pictures and tell me if they look right. With the crank in line at TDC, the flywheel notch is visible...
Hi Stuart, yeah we wrapped the cams with rags and then covered with cardboard placed in a vice with wood over the clamping pieces. I read...
Thank you Yes I can do that, I’ll get it put together as soon as I’ve got the car sorted and get a little free time :) Steve
I just used a pair of ratchet hand clamps and some masking tape for the bottom edges. It worked well tbh Stew :) [ATTACH]
£430 seems excessive if it’s not been ported fully in my opinion
Both are standard OE design
The stock valves are sodium filled, the main enemy is heat, from what I understand (and someone please correct me if I’m talking ****, lol) at...
I recently repaired mine using Arildite epoxy. I’d recommend using the 1hr cure time version they sell as the one I used took over 8hrs to cure. I...
Thank you :)
@<tuffty/> what would you recommend as the ideal compression ratio for a stroker piston on my setup, baring in mind my block’s been decked and...
Ahh, I see thanks for clearing that up :) I remember Bill saying he’d make adjustments when it goes back for the stroker bottom end doing
Separate names with a comma.
