Search results

  1. C

    Engine Rebuild

    Sure. Inviato dal mio SM-G980F utilizzando Tapatalk
  2. C

    Coolant levels after new thermostat

    Coolant level should be checked whith cold engine before start it up. Inviato dal mio SM-G980F utilizzando Tapatalk
  3. C

    New balance shaft fitted. (New problem)

    Vibration can be caused by wrong position of the ballance shaft.flywheel bolt can not entry in oil pan. Inviato dal mio SM-G980F utilizzando Tapatalk
  4. C

    Engine Rebuild

    I did the same thing with mine.i saved a lot of time . Inviato dal mio SM-G980F utilizzando Tapatalk
  5. C

    Engine Rebuild

    I allready rebuided my engine with woessner 83.00 mm lowered(1-9.2)compression ratio.even with a stock file you can see the difference.but with a good stage 2 remap,you will have great satisfactions. Inviato dal mio SM-G980F utilizzando Tapatalk
  6. C

    Please Need help with wiring new aftermarket headunit

    I think you would need something like this.https://www.ebay.de/itm/260918260150 Inviato dal mio SM-G980F utilizzando Tapatalk
  7. C

    Balance Shaft delete using Free wheel.

    I did not noticed extra vibrations Inviato dal mio SM-G980F utilizzando Tapatalk
  8. C

    Balance Shaft delete using Free wheel.

    Hi,i swaped the all oil pump ballanceshaft group,and fited an regular oil pump. Inviato dal mio SM-G980F utilizzando Tapatalk
  9. C

    LED number plate lights

    You need led decoder. Like some resistors.i solved this way. Inviato dal mio SM-G980F utilizzando Tapatalk
  10. C

    ECU full factory reset.

    An programer these days has a verry low cost,like kessv2 clone..it does the job verry well on this car.like this you can save the current map ,and with hw sw can find the ori file.j could help in this case. Inviato dal mio SM-G935F utilizzando Tapatalk
  11. C

    ECU full factory reset.

    The best way i think would be rewrite the ori file.if you have a programer is a an easy operation Inviato dal mio SM-G935F utilizzando Tapatalk
  12. C

    Rear discs

    Nope Inviato dal mio SM-G935F utilizzando Tapatalk
  13. C

    What would spend £1000 on , well on your B7 that is.

    You should be on the limit with the money[emoji2] Inviato dal mio SM-G935F utilizzando Tapatalk
  14. C

    What would spend £1000 on , well on your B7 that is.

    Than to fit a pipedown.it worth,i think only to gain power.maybe someone like the exterior or interior improovement Inviato dal mio SM-G935F utilizzando Tapatalk
  15. C

    What would spend £1000 on , well on your B7 that is.

    To start i would do a stage 2 remap. Inviato dal mio SM-G935F utilizzando Tapatalk
  16. C

    1.8t Misfire Cyl 1&2 under high boost, oil in cylinders

    In this case i would try reflash ori and see what happens Inviato dal mio SM-G935F utilizzando Tapatalk
  17. C

    Has my clutch gone?

    Could be the flyweel broken Inviato dal mio SM-G935F utilizzando Tapatalk
  18. C

    Oil and error info for A4 B7 TDI 170HP // 2007

    5w30 with low ash ,are required for the dpf.maybe first would be best to do an forced regeneration,than change oil and filter Inviato dal mio SM-G935F utilizzando Tapatalk
  19. C

    Loss of water , a mystery

    Hi,you need to make pressure in the cooling system with an cooler system leaking tester Inviato dal mio SM-G935F utilizzando Tapatalk
  20. C

    High-performance Oil Choice?

    No,but i have a ballace shaft delete kit with 1.8 t oil pump conversion,and has high oil pressure at cold engine,so i need thin oil at low temperatures Inviato dal mio SM-G935F utilizzando Tapatalk
Top