Has anyone ever used the bar tek n75 race valve. The description says plug and play with an increase 30hp and 40 nm torque. Either way at 100 euros its cheaper than getting an original from audi. Advice needed
Bar tek n75 race valve
- Thread starter Asim1
- Start date
Sounds like complete crap to me dude. An N75 doesn’t increase bhp or torque. An N75 valve basically tells the wastegate when to open and close controlling boost.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Exactly why I was put off. Seemed a bit strange to get extra power from that. But I do need a new n75 so will buy one from main dealers instead. I'm still unsure on whether to remap eventually or not
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
All these valves tend to do is change the reaction time of the valve on spool so you essentially get a boost spike as the ECU is mapped based on a faster solenoid valve and the PID setup will just reign in the valve anyway once its realises the boost is more than its expecting... assuming it hasn't gone into limp mode first from an overboost event...
<tuffty/>
<tuffty/>
I fitted a new N75 to my car this summer and bought one from Crewe Audi parts. They’re about £40 iirc so not toooo bad.
Okay thats a brilliant price.. when I rang my local audi dealer was quoted around 100 cant quite remember the figure
Crewe Audi are brilliant I got my haldex kit from them they were the cheapest about from eBay all genuine and very good customer services with answering questions pronto
Sent from my iPhone using Tapatalk
I ordered everything on here using the parts service and they posted directly to my door. Easy peasy and paid with PayPal. The lazy way to shop!!
I’ve used parts request on here a few times, very good. It’s Crewe Audi that are parts request on the forum
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
