Hi,
Bought a SUP, cant be bothered to inflate it every time so had the great Idea of putting it on the roof.
Thought I would get some bars...easy!
Contacted Audi in the UK: was told I need the 4F...666
Tried them today. not even remotely fitting, totally wrong.
the 4G9 071 151 L is 2012/13 onwards depending on whichever site. the profile is not correct, It has the under clamp for raised rails.
However, on the audi site there is a picture, the only one on the internet by the look of it and it has the above 4G product number, in the Allroad section showing the bars are on raised rails but the clamp is a flush rails clamp without underclamp bar. I guess its for an Avant. Either way, the picture is not of the 4G code.
Anyway. those must be the bars I typically need. A search of the 4F and 4G numbers above are futille as neither fit.
So it looks like I have a 2011 A6 Allroad with raised rails that takes bars that are for flush mounted rails and look like the bars advertised for a later model that dont fit.
Contacted an Audi Europe, was told the 4G would not fit but was not told what would.
My question is, what is the part code for the ones shown in the picture, is it an Avant with flush rails after the 4f...666 ?
and what Frankenaudi have I got?
The pin locators are approx. 90mm apart and the distance between them side to side back is approx 103.5cm front 104.8
The 4G 9071151A for 2011 Avant onwards on audi spares shows model usage shows 2012 onwards on the same site??
This was supposed to be easy
Any help appreciated
Bought a SUP, cant be bothered to inflate it every time so had the great Idea of putting it on the roof.
Thought I would get some bars...easy!
Contacted Audi in the UK: was told I need the 4F...666
Tried them today. not even remotely fitting, totally wrong.
the 4G9 071 151 L is 2012/13 onwards depending on whichever site. the profile is not correct, It has the under clamp for raised rails.
However, on the audi site there is a picture, the only one on the internet by the look of it and it has the above 4G product number, in the Allroad section showing the bars are on raised rails but the clamp is a flush rails clamp without underclamp bar. I guess its for an Avant. Either way, the picture is not of the 4G code.
Anyway. those must be the bars I typically need. A search of the 4F and 4G numbers above are futille as neither fit.
So it looks like I have a 2011 A6 Allroad with raised rails that takes bars that are for flush mounted rails and look like the bars advertised for a later model that dont fit.
Contacted an Audi Europe, was told the 4G would not fit but was not told what would.
My question is, what is the part code for the ones shown in the picture, is it an Avant with flush rails after the 4f...666 ?
and what Frankenaudi have I got?
The pin locators are approx. 90mm apart and the distance between them side to side back is approx 103.5cm front 104.8
The 4G 9071151A for 2011 Avant onwards on audi spares shows model usage shows 2012 onwards on the same site??
This was supposed to be easy
Any help appreciated
Attachments
Last edited:
