A3 2010 2.0 tdi s line Retrofit Cruise Control

J

Jonny1977

New Member
Joined
Nov 16, 2020
Messages
8
Reaction score
0
Points
1
Location
Teesside
im after some info on the steps needed on retrofitting cruise to my car, I can buy a kit off of Ebay which includes the stalk and cowling.
ive been told it would need coding, could anyone tell me approx cost and how this is done, most importantly can it be done to my car.

Thanks
 
I had It done to mines if you put out a shout to someone with vcds in your area. Cost not expensive

Sent from my SM-G960F using Tapatalk
 
  • Like
Reactions: Jonny1977
If you need it all fitted, ping me a WhatsApp to discuss it.
 
Another question, does anyone know the correct part number I need as there seems to be a few different ones.
 
8P0953513F is the stalk part number for your 2010 car.
theres one on ebay for £30 delivered, from lithuania though, but itll be here within a week.
https://www.ebay.co.uk/itm/Audi-A3-...710441&hash=item3fed9fc60e:g:HVgAAOSwzVdfqsZ3

the lower cowl you can use a dremel to extend the hole for the cruise stalk. theres an outline to follow on the inside of the cowl.

alternatively, the part number for the lower cowl with the hole for cruise present is 8p0953512A (the A is important, the same part number without the A is what you already have).
 
You can do the cut your self as samisnake said.
If you are careful enough you will have better results than my sloppy cut! Although nobody has noticed.

Also you must check the steering module. And check if it is compatible with cruise control.
Do you have MFSW (buttons on the steering wheel)?
if so I beleive you already have the Highline module which works with cruise control as well .
 

Attachments

  • IMG_3793.jpg
    IMG_3793.jpg
    342.1 KB · Views: 140
samisnake said:
8P0953513F is the stalk part number for your 2010 car.
theres one on ebay for £30 delivered, from lithuania though, but itll be here within a week.
https://www.ebay.co.uk/itm/Audi-A3-...710441&hash=item3fed9fc60e:g:HVgAAOSwzVdfqsZ3

the lower cowl you can use a dremel to extend the hole for the cruise stalk. theres an outline to follow on the inside of the cowl.

alternatively, the part number for the lower cowl with the hole for cruise present is 8p0953512A (the A is important, the same part number without the A is what you already have).
Click to expand...
Thanks for the reply, so thats all I have to buy, fit it then get it coded, is that right?
 
George Kost said:
You can do the cut your self as samisnake said.
If you are careful enough you will have better results than my sloppy cut! Although nobody has noticed.

Also you must check the steering module. And check if it is compatible with cruise control.
Do you have MFSW (buttons on the steering wheel)?
if so I beleive you already have the Highline module which works with cruise control as well .
Click to expand...
Yes I have the MFSW controls, so iy should work ok?, just dont want to but a useless piece of plastic
 
Jonny1977 said:
Yes I have the MFSW controls, so iy should work ok?, just dont want to but a useless piece of plastic
Click to expand...
1. As you have MFSW the steering module should be the correct for the cruise control retrofit.
2. Yes as said above the plastic has markings where should be cut. Mine did! Just take tour time with the dremel.
 
George Kost said:
1. As you have MFSW the steering module should be the correct for the cruise control retrofit.
2. Yes as said above the plastic has markings where should be cut. Mine did! Just take tour time with the dremel.
Click to expand...
Thanks, appreciated
 
You must log in or register to reply here.

Similar threads

Marek196c
Cruise control retrofit 2010 a3
Replies
18
Views
7K
ab1702
ab1702
J
2010 S3 Cruise Control Retrofit
Replies
9
Views
6K
JS3
J
Widg
A3 8P Cruise Control problematic retrofit.
Replies
13
Views
4K
marcjwebb
M
1
2010 audi a3 s line 2.0 tdi 170 DAMAGED
Replies
1
Views
638
Egbert
E
M
A3 retrofit cruise control
Replies
3
Views
1K
marlon20
M
Top
Back