No errors at all (tank flap not important)
Yap tank flap is another issue which will claim warranty from audi during next servicing
Sent from my iPhone using Tapatalk
No errors at all (tank flap not important)
Are you error free?
This should in the center display (5f) now.
Tested and check rear buzzer is not faulty, switch over and test is working fine, even wiring tested is not faultyJust check rear buzzer connection then. Or it might be defect. Switch front and rear..
Could the front and rear be on the same pitch/freq?
Could the rear be muted?
So this means user error...(audio off, or wrong connectiin) or bad pla3.0...
Got anybody naar you with a3 and pla 3.0?
So this means user error...(audio off, or wrong connectiin) or bad pla3.0...
Got anybody naar you with a3 and pla 3.0?
Tried output test on vcds/odis?
Hi,You already upgraded the rear sensors and put 50 into byte 26. (if no error during driving above 70 km/h then you are set, else change to F0)
You coded the cars abs for pla 2.0... not 3.0.
To add pla 3.0:
Change byte 24 from 000000010 to 00100010 (bit 5 checked)
Change byte 27 from 00001010 to 00001000 (bit 1 unchecked)
Abs wil be ok now.