Hi guys,
I bought the below kit with their rear camera:
https://unique-ad.co.uk/product/com...t-for-audi-a4-a5-a6-q7-mmi-2g-high-2005-2009/
https://unique-ad.co.uk/product/dir...ing-camera-for-audi-a4-a5-s5-q5-b8-2008-2016/
The install has been smooth but Im struggling with getting the rear camera working. When selecting reverse the display does not switch therefore the Car Play unit doesn't appear to be getting Reverse gear selection signal (even though the Car Play unit has a CAN gateway pass through)
With VCDS I enabled Rear Cam in the CAN gateway installed list in a hope the CarPlay unit will get the signal but no joy.
I emailed support and they sent this:
https://unique-ad.co.uk/general-usa...o-add-aftermarket-camera-to-idcore-interface/
Using the manual gearbox method I was able to get the camera working but I got further issue:
The display cycles between on and off when in Reverse (as CAN voltage is fluctuating from reverse light), workaround they suggest to install a 4 pin relay - But I wanted to avoid this as there must be a method to get a reliable signal for Reverse?
Any suggestions?
Cheers
Bobby
I bought the below kit with their rear camera:
https://unique-ad.co.uk/product/com...t-for-audi-a4-a5-a6-q7-mmi-2g-high-2005-2009/
https://unique-ad.co.uk/product/dir...ing-camera-for-audi-a4-a5-s5-q5-b8-2008-2016/
The install has been smooth but Im struggling with getting the rear camera working. When selecting reverse the display does not switch therefore the Car Play unit doesn't appear to be getting Reverse gear selection signal (even though the Car Play unit has a CAN gateway pass through)
With VCDS I enabled Rear Cam in the CAN gateway installed list in a hope the CarPlay unit will get the signal but no joy.
I emailed support and they sent this:
https://unique-ad.co.uk/general-usa...o-add-aftermarket-camera-to-idcore-interface/
Using the manual gearbox method I was able to get the camera working but I got further issue:
The display cycles between on and off when in Reverse (as CAN voltage is fluctuating from reverse light), workaround they suggest to install a 4 pin relay - But I wanted to avoid this as there must be a method to get a reliable signal for Reverse?
Any suggestions?
Cheers
Bobby