Cruise control retrofit problem

K

Kevin mathews

Registered User
Joined
Jan 14, 2019
Messages
78
Reaction score
1
Points
8
Location
Dubai
Hey guys

Ive got a audi a3 2.0 fsi '07
So i installed the new cruise control alongside changed the steering module as well to 1K0-953-549-F

Coded everythiing and it went well

But when i tried to activate the cruise control it didnt work

Any idea what i did wrong

Any help wuld be appreciated


Sent from my SM-N970F using Tapatalk
 
1k0 or 8p0 as latter is the correct one.

Assume you coded engine 01 aswell as 16.
 
  • Like
Reactions: Eren S3
Hey Kevin,

Have a little read of this retrofit guide (if you haven't already) and see if that helps. It's what I used to retrofit and code mine. Luckily I didn't need to change the module so it was a bit simpler but looking at that guide it seems you should have the correct steering module.

https://lightnings.dk/fartpilot_en.html

Hope this helps!
Keep us posted.
 
Last edited:
So i didnt change the coding for the engine before and i did it now but still no luck nothing is showing up on the dashboard

Sent from my SM-N970F using Tapatalk
 
The part number should be 8p0 not 1k0
 
Decode, recode with engine of but ignition on.
 
Finally got around the problem and the recoding worked. Works like a charm . Now on to the steering sensor recalibration

Much appreciated guys !!

Sent from my SM-N970F using Tapatalk
 
Calibrate angle before testing as cc won't operate.
 
Hi

I have completed this retrofit today but I'm not sure what you mean by steeringsensor recalibration? And how I would do this?
 
Knockout King said:
Hi

I have completed this retrofit today but I'm not sure what you mean by steeringsensor recalibration? And how I would do this?
Click to expand...
If yours doesnt require its not needed.

Is any fault showing on the dash?

Sent from my SM-N970F using Tapatalk
 
No faults showing on dashboard. Well the fault light came on for a few seconds but then went off and never came back on after that
 
audi upgrades
Knockout King said:
No faults showing on dashboard. Well the fault light came on for a few seconds but then went off and never came back on after that
Click to expand...

That's normal when fitting cruise & not changing the module & slip ring.
 
That’s fine. I have a 2008 Audi A3 8p PREfacelift model and I only changed the indicator and cruise control stalk and it worked. I didn’t need to changed the slip ring and module.
 
You must log in or register to reply here.

Similar threads

mechanic69
Cruise Control retrofit problem
Replies
16
Views
5K
xray40
xray40
P
Cruise control retrofit.......but problem!
Replies
11
Views
2K
AudiFan7
A
S
Cruise control retrofit
Replies
0
Views
453
scott_159
S
Ali A4
Retrofit Cruise Control
Replies
8
Views
827
Ali A4
Ali A4
Chrisstorey
Retrofit Cruise Control
Replies
20
Views
3K
leeds2592
leeds2592
Top
Back