Convert 1.8 QTS to DBW

RaulQTS

Registered User
Joined
Feb 16, 2016
Messages
205
Reaction score
10
Points
18
So I managed to track down an IE large port inlet from the USA which already has a dbw throttle body attached. What is required to convert to drive by wire from cable. I already have an emu standalone ecu ?
 

Attachments

  • 1AF52FBF-4516-41AE-96DA-5EC74B4A3E2B.jpeg
    1AF52FBF-4516-41AE-96DA-5EC74B4A3E2B.jpeg
    34.7 KB · Views: 290
which EMU do you have? If it is the old silver one, you can't use the DBW, as that one doesn't support that.. If you have the new Classic or Black, you can wire the TB in, and the EMU can control it. Just need to change the settings in your file.
Of course you need to do some wiring, and install a DBW pedal
 
Do I need the whole pedal assemble with its wiring loom ?
 
Do I need the whole pedal assemble with its wiring loom ?
Yup, you'll need the dbw pedal.

2016 Audi A3 1.6tdi SE Technik

2007 Supercharged 365bhp Civic Type R
 
Went with a vr6 throttle body it was easier lol
 

Attachments

  • 04A17196-89F0-4E5C-B4E1-EACB46420777.jpeg
    04A17196-89F0-4E5C-B4E1-EACB46420777.jpeg
    1.4 MB · Views: 206