OZ Racing Ultraleggera HLT

JibThis · Jun 27, 2019

Looking to buy set of OZ Racing Ultraleggera HLT in black, Matt. I have the staggered setup on 2018 FL.

Two options on the ET of the wheels

19x8.5 ET38.
19x8.0 ET41.

Or

19x8.5 ET47.
19x8.0 ET45.

Stock is 46/42 (I think)...so thinking 38/41 will be better??? no spacers to get 8mm on front and slight increase on rear.

Is that thinking correct? anyone else running these wheels on those ET's?

AudiNutta · Jun 27, 2019

Not sure of size specifics, but alex_collins98 on instagram is selling a set of these off of his TTS....

[M]ike · Aug 10, 2019

I'm actually interested since I'm looking at a set of OZ Leggeras HLT 19" 8,5J ET45 for my RS3 Pre FL. Want to go square setup with 245 tires.

Will 19" 8.5J ET45 with 245 Michelin fit the car without problems?

Currently have the stagerd setup. and the fornt tires are almost gone.

Oli. · Aug 10, 2019

On my PFL I'm running this wheel in the following size, 8.5 x 19 ET38 all round, still running staggered tyres, although Im going 235/35 all round in PS4S soon. Currently running MSS Springs, but am switching to Bilstein B16's, when they turn up!

Sug · Aug 10, 2019

They are lovely wheels always have been a favourite of mine. I think the black Matt/gloss colour just gets lost in the car. Too much of an investment to hide away. Gunmetal/anthracite would be my choice but not sure if they come in that colour.

[M]ike · Aug 10, 2019

Oli. said:
On my PFL I'm running this wheel in the following size, 8.5 x 19 ET38 all round, still running staggered tyres, although Im going 235/35 all round in PS4S soon. Currently running MSS Springs, but am switching to Bilstein B16's, when they turn up!

My RS is also on MSS Track springs. Both front as low as they go and the back 7mm from lowest setting. Used 10mm spacers and they are rubbing.. do you habe any issues with the wheels rubbing? I think it’s the little plastic wing on the wheel guard. I’m running stock staggerd setup with pirelli pzero’s

[M]ike · Aug 10, 2019

Sug said:
They are lovely wheels always have been a favourite of mine. I think the black Matt/gloss colour just gets lost in the car. Too much of an investment to hide away. Gunmetal/anthracite would be my choice but not sure if they come in that colour.

I like them in black, but you can get them in a darker silver color.

zippster · Aug 11, 2019

Not sure of the sizes but they look EPIC! Look I’d go for!

Oli. · Aug 11, 2019

[M]ike said:
My RS is also on MSS Track springs. Both front as low as they go and the back 7mm from lowest setting. Used 10mm spacers and they are rubbing.. do you habe any issues with the wheels rubbing? I think it’s the little plastic wing on the wheel guard. I’m running stock staggerd setup with pirelli pzero’s

Not fully lowered but no rubbing.

In answer to the comment above and I’m thinking of refurbing in grey

JibThis · Aug 11, 2019

I contacted oZ and they suggested the following for the staggered setup

Front -> Ultraleggera HLT 8.5"x19" / 5x112 / ET47
Rear -> Ultraleggera HLT 8.0"x19" / 5x112 / ET45

5pot4banger · Aug 12, 2019

[M]ike said:
I'm actually interested since I'm looking at a set of OZ Leggeras HLT 19" 8,5J ET45 for my RS3 Pre FL. Want to go square setup with 245 tires.

Will 19" 8.5J ET45 with 245 Michelin fit the car without problems?

Currently have the stagerd setup. and the fornt tires are almost gone.

I'll try get a photo when I'm home this weekend but I switched to the oz racing superturismo in that size but ET38 (i think they do 44) and also pilot sport 4s tyres 255/35 all round and they fit. Do get rubbing here and there but it's not that often that I worry. I was more worried with clearing the brakes to be fair.

No spacers/springs, car is standard height but the combo fit the guards beautifully, and with the side skirts, front lip the car is low enough as well imo.

[M]ike · Aug 12, 2019

5pot4banger said:
I'll try get a photo when I'm home this weekend but I switched to the oz racing superturismo in that size but ET38 (i think they do 44) and also pilot sport 4s tyres 255/35 all round and they fit. Do get rubbing here and there but it's not that often that I worry. I was more worried with clearing the brakes to be fair.

No spacers/springs, car is standard height but the combo fit the guards beautifully, and with the side skirts, front lip the car is low enough as well imo.

Those wheels are stil candidates for me as well. Funny enough I saw a RS3 for sale with those wheels, I told myself I needed to buy a RS3. Thats what started it for me

Please do post some photo’s!

Oli. · Aug 12, 2019

Check out my Instagram @bigpetrolhead

[M]ike · Aug 12, 2019

Oli. said:
Check out my Instagram @bigpetrolhead

Found, @rs3_sepang here

zippster · Aug 13, 2019

@zippster here too

[M]ike · Aug 16, 2019

JibThis said:
I contacted oZ and they suggested the following for the staggered setup

Front -> Ultraleggera HLT 8.5"x19" / 5x112 / ET47
Rear -> Ultraleggera HLT 8.0"x19" / 5x112 / ET45

That sounds about right as thats the closest to stock they can provide. I believe the stock staggerd is front, 19” 8,5j ET 53, back 19” 8.0j ET 48? Not 100% sure about the back offset.

Search

Search

OZ Racing Ultraleggera HLT

JibThis

Registered User

AudiNutta

Moderator

[M]ike

Dutch RS3

Oli.

Registered User

Sug

Registered User

[M]ike

Dutch RS3

[M]ike

Dutch RS3

zippster

Registered User

Oli.

Registered User

JibThis

Registered User

5pot4banger

Registered User

[M]ike

Dutch RS3

Oli.

Registered User

[M]ike

Dutch RS3

zippster

Registered User

[M]ike

Dutch RS3

Similar threads