Help identifying part

Jamesh87

Jamesh87

Registered User
Joined
Jul 10, 2016
Messages
87
Reaction score
36
Points
18
Location
Hastings
looking to take off the ramair induction kit that came with the car i recently got (2007 2.0tfsi) and went to fit the standard airbox back on and it seems to be missing a rubber sleeve or something that goes on the oe intake pipe to secure it on properly as now it just flops around when secured on the engine end?
 
Jamesh87 said:
looking to take off the ramair induction kit that came with the car i recently got (2007 2.0tfsi) and went to fit the standard airbox back on and it seems to be missing a rubber sleeve or something that goes on the oe intake pipe to secure it on properly as now it just flops around when secured on the engine end?
Click to expand...
Best to post a pic off where you think your missing something as pic helps us get a picture off the part .
 
Attached a pic, not near car so cant take proper one have circled in orange where rubber bit needs to be
 

Attachments

  • F2AAEE84-CBAB-486A-9F1D-25DA570C45E0.jpeg
    F2AAEE84-CBAB-486A-9F1D-25DA570C45E0.jpeg
    96.5 KB · Views: 178
audi upgrades
On my Tsfi that looks like a spring clip which attaches said hose to Turbo if I am not mistaken , but if it ain't am sure someone will be along to put me right lol
 
I have the intake pipe and the spring clip(which is a ****** to get off!) but where that pipe slides over im pretty sure there is a rubber bit that slides in first, as now if i try to put it on its just floppy
 
  • Like
Reactions: Daveyonthemove
Jamesh87 said:
I have the intake pipe and the spring clip(which is a ****** to get off!) but where that pipe slides over im pretty sure there is a rubber bit that slides in first, as now if i try to put it on its just floppy
Click to expand...
There is a rubber seal that joins the pipe from turbo to airbox next to maf sensor where it has 2 clips which pull it together
 
ch1z64 said:
There is a rubber seal that joins the pipe from turbo to airbox next to maf sensor where it has 2 clips which pull it together
Click to expand...
Not that maf sensor end its engine end, the end ive circled if i slide that on and do clip its just floppy, im sure on my old a3 it had a rubber bit too
 

Attachments

  • C0CBFC2A-D49B-4775-A329-0401D5666F01.jpeg
    C0CBFC2A-D49B-4775-A329-0401D5666F01.jpeg
    122.7 KB · Views: 172
  • Like
Reactions: Daveyonthemove
Jamesh87 said:
Not that maf sensor end its engine end, the end ive circled if i slide that on and do clip its just floppy, im sure on my old a3 it had a rubber bit too
Click to expand...
Yes, it's the end that fits to the Turbo, and the oval shape attaches to the airbox just after they MAF with the two clips.
 
Jamesh87 said:
Maybe if i order whole pipe it will come with it then
Click to expand...
I'm not sure it does, I did originally post a number for a pipe that I thought had it included, but after checking further I couldn't see it.
That part is only £10 on ebay, but call a dealer to confirm it's the right part for your engine as I can't be 100% sure.
 
@Jamesh87 - when I sold my factory cover I thought I'd lost this exact piece - it's like a sleeve that sits onto the turbo, then the plastic down pipe slides over. For me, it was wedged into the main piece of down pipe - worth a check?
 
  • Like
Reactions: Jamesh87
samuelh_888 said:
@Jamesh87 - when I sold my factory cover I thought I'd lost this exact piece - it's like a sleeve that sits onto the turbo, then the plastic down pipe slides over. For me, it was wedged into the main piece of down pipe - worth a check?
Click to expand...
I did have a check sam but no joy :-( been a right pain trying to think of what its called haha
 
  • Like
Reactions: samuelh_888
Funny enough I probably have it as I kept all my oem box but where it could be is the question , but if I come across it I will mind what it's for now
 
  • Like
Reactions: Jamesh87
Not sure 100% if that’s what you mean but the only numbers on it are 669 850 0
Only changed intake to revo the other week so haven’t put all the oem bits away yet lol

c164a3ff044512d5b8ca06008ae9b144.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Daveyonthemove
Bryant1998 said:
Not sure 100% if that’s what you mean but the only numbers on it are 669 850 0
Only changed intake to revo the other week so haven’t put all the oem bits away yet lol

c164a3ff044512d5b8ca06008ae9b144.jpg



Sent from my iPhone using Tapatalk
Click to expand...
Bi bryant thats certainly the little ******! Many thanks for pic and numbers, and everyone for their help
 
  • Like
Reactions: abmat and Daveyonthemove
Jamesh87 said:
looking to take off the ramair induction kit that came with the car i recently got (2007 2.0tfsi) and went to fit the standard airbox back on and it seems to be missing a rubber sleeve or something that goes on the oe intake pipe to secure it on properly as now it just flops around when secured on the engine end?
Click to expand...

How come you reverting to standard airbox......do you not like the ram Air?

Gaz
 
just prefer the standard airbox less noise, feels like
Less torque with the ramair too, car is completely standard maybe different with a map but that isnt going to happen anytime soon
 
where abouts are you? I would of swapped you my standard set up for your Ram Air set up?
 
  • Like
Reactions: samuelh_888
Yes thats a fair old trek lol, when the bit turns up for standard one it will be up for sale mate
 
You must log in or register to reply here.

Similar threads

Sayam
Help identifying a part from numbers plz
Replies
7
Views
2K
Sayam
Sayam
S
Help identifying LEDs
Replies
12
Views
890
Chiefnutter
C
Lewis90
Help identifying Lights
Replies
6
Views
865
Ash187
Ash187
chrisred
Help identifying this noise
Replies
4
Views
984
Artimus
Artimus
Matt93
Need help identifying air pipe?
Replies
1
Views
422
NHN
NHN
Top
Back