Coding

Robbyb

Robbyb

Registered User
Joined
Apr 23, 2017
Messages
192
Reaction score
24
Points
18
I’ve coded my reverse camera and I’ve installed the adaptor for the rnse. But there is no picture when selecting reverse. Changed 4 to value 1 in navigation module.

Thanks in advance


Sent from my iPhone using Tapatalk
 
Did you connect the wire from the reversing light to connector C, pin 2 on the RNSE.
 
norad97 said:
Did you connect the wire from the reversing light to connector C, pin 2 on the RNSE.
Click to expand...

Right I’ve connected white wire to pin 2. The camera comes up on the screen when in reverse but the radio goes black when in drive.

I’ve taken the white wire out of pin 2 and the radio screen stays on all the time. What am I doing wrong? My chamber C is the reverse of the diagram on the instructions.


Sent from my iPhone using Tapatalk
 
Just look at the back of the RNSE it shows all the pin locations, use these and no other.Also have you coded right, I thought there is another part you have to do. There are online guides on fitting canera, have a good read about coding. How did you get the wire into connector C pin2 ?
 
norad97 said:
Just look at the back of the RNSE it shows all the pin locations, use these and no other.Also have you coded right, I thought there is another part you have to do. There are online guides on fitting canera, have a good read about coding. How did you get the wire into connector C pin2 ?
Click to expand...

The wire actually has a proper metal male end that slides into pin 2. I’ve put that into pin 2 on chamber c.

The second coding part I’ve seen is about parking assist. I don’t have a module for parking assist. So don’t know how I’d do that.


Sent from my iPhone using Tapatalk
 
audi upgrades
norad97 said:
Have you done this,

http://wiki.ross-tech.com/wiki/index.php/Audi_Radio/Navigation_System_(RNS-E)
Adaptaion, channel 4 your screen will go black when moving until you code it right.
Click to expand...

Channel 4 would only accept the Lamborghini reverse camera setting. I have the Lamborghini setting set as well on startup.

I believe the white wire needs to be wired to
Vehicle Electrical System Control Module, T23/5 or T23/8

Apparently those wires are under the steering wheel column.




Sent from my iPhone using Tapatalk
 
Are you saying that RSNE, go into adaptaion, channel 4, reversing camera fitted, or not fitted, it says Lambo??
The wire goes to the place you had it first,
You had the reversing picture, when you move the car thinks you have tv tuner and cuts the picture. You need to look at your coding, never heard if fitting the wire in the module under the wheel.You must reset the RSNE.
 
Last edited:
audi upgrades
norad97 said:
Are you saying that RSNE, go into adaptaion, channel 4, reversing camera fitted, or not fitted, it says Lambo??
Click to expand...

I was told it has to be in Lamborghini setting on startup for a reverse camera to work. Is that incorrect?


Sent from my iPhone using Tapatalk
 
I did see a guide that used Lambo startup,
But I dont think you need to do that.
Is your RSNE software up to date as well.
Or when did you last update your maps.
 
norad97 said:
I did see a guide that used Lambo startup,
But I dont think you need to do that.
Is your RSNE software up to date as well.
Or when did you last update your maps.
Click to expand...

I’ve recently updated my maps. About a month ago.


Sent from my iPhone using Tapatalk
 
audi upgrades
norad97 said:
Anyone else please to come in on this.
Click to expand...

Just wanted to say thank you for all your help. I really appreciate it. I’m going to reset the rnse and change it to A4 start up.


Sent from my iPhone using Tapatalk
 
norad97 said:
Anyone else please to come in on this.
Click to expand...

Figured it out. I was connecting the white wire to the wrong red wire. It needed to go on the reverse feed from the reverse light not the switch live from the fuse box. Also changed it to Audi A4 start up but it still uses the Lamborghini reverse camera setting (1) in channel 4.

All I’ve got to do now is wire in a resistor for the led bulb in the number plate light.
Not sure where I get that from but I will figure it out.

Again thank you so much for all the help. It really is appreciated. Couldn’t have done it with out ya.


Sent from my iPhone using Tapatalk
 
Glad you got it sorted, not sure how you wired it to switch live, but the good thing is you got it going.:thumbs up:
 
You must log in or register to reply here.

Similar threads

kite
Coding a Cab
Replies
19
Views
1K
PMJ
P
dentsy
Coding help please
Replies
3
Views
567
dentsy
dentsy
T
Suggestions for coding
Replies
2
Views
443
Tiprat
T
J
Headlight coding leeds
Replies
6
Views
826
BennyG_UK
BennyG_UK
C
RNS-E coding
Replies
7
Views
5K
Ian MACKINNON
I
Top
Back