I've just done this and didn't find the removal difficult, as said there is a slot in the clear lenses towards the centre of the car that allows you to prise the fitting out. I blindly removed the light only to find, as has already been mentioned, that the connecting plug has no extra cable to pull out and allow for reconnecting. That's where I ran into issues. After much effort and cursing on my part I found that using a small screwdriver onto the rear of the plug allowed me to manipulate it so when I refitted the light into place I was able to push it back onto the plug. I'm going to have to do this again though as it was curiosity that drove me to remove it in from he first place. I've just purchased my B7 convertible and bought an internal LED kit. It's all fitted and looks great but yesterday I found the rear footwell lights, I didn't know I had them until then. I wanted to change them to LEDs as well so just wanted to confirm the type I'd need! I think next time I'm going to try and have the screwdriver in place on the rear plug when I move the light fitting and see if I can leave them connected but still get to the bulb.