Hybrid MAF values

Madmax199

Madmax199

Registered User
Joined
Apr 3, 2016
Messages
74
Reaction score
70
Points
18
Hi gang, just curious since you guys have so many K04 Hybrid versions (and even TFSI based hybrids), what kind of MAF values are you getting? It would be nice to see the type of hybrid, operating psi, and MAF values in one spot.
 
Nice Bill, that's what happens on mine too on a 80mm ID MAF housing (when I still bothered to run a MAF). Maxed out at 298 throughout the range.


image-19.jpg
 
  • Like
Reactions: Pedrosousa
Madmax199 said:
Nice Bill, that's what happens on mine too on a 80mm ID MAF housing (when I still bothered to run a MAF). Maxed out at 298 throughout the range.


image-19.jpg
Click to expand...
your boost delivery being a lot more than what I've got the lupo set to.. 16psi and rises progressively with revs to the 24psi level
its only a 1000kg car and fwd with 195-50-15 tyres on it.. wheelspin kinda an issue.. gear based boost helps but a slow roll in helps make it tractable.
 
badger5 said:
your boost delivery being a lot more than what I've got the lupo set to.. 16psi and rises progressively with revs to the 24psi level
its only a 1000kg car and fwd with 195-50-15 tyres on it.. wheelspin kinda an issue.. gear based boost helps but a slow roll in helps make it tractable.
Click to expand...

Ye, I hear you! I light up the massive and sticky 315 front tyres on my car if the haldex is disengaged. So I can only imagine Lupo with much less front rubber. Do you have an LSD on it?

It's funny, my boost delivery is the opposite of yours. I set it to slingshot to 27/28 psi at onset, then gradually taper it to about 16 psi up top.

 
Madmax199 said:
Ye, I hear you! I light up the massive and sticky 315 front tyres on my car if the haldex is disengaged. So I can only imagine Lupo with much less front rubber. Do you have an LSD on it?

It's funny, my boost delivery is the opposite of yours. I set it to slingshot to 27/28 psi at onset, then gradually taper it to about 16 psi up top.

Click to expand...

yea lupo struggles for traction.
without more meth enhancement the big hit of boost just upsets its timing pull...
Definately considering your route for direct port meth tho.. See whats left in the little car
 
  • Like
Reactions: S3Alex, scotty_24 and Madmax199
badger5 said:
yea lupo struggles for traction.
without more meth enhancement the big hit of boost just upsets its timing pull...
Definately considering your route for direct port meth tho.. See whats left in the little car
Click to expand...

Just a reminder that I believe this is your WIFE'S CAR, Bill. :p

Lucky you, man. If my wife drove a 400+hp, light FWD car I'd find her in a ditch somewhere on the side of our lovely mountainous roads.
 
Shoomakan said:
Just a reminder that I believe this is your WIFE'S CAR, Bill. :p

Lucky you, man. If my wife drove a 400+hp, light FWD car I'd find her in a ditch somewhere on the side of our lovely mountainous roads.
Click to expand...
yep. it is an actual shopping car.. that said she has a new luv in her life ~(a Z4) so lupo mostly sits on the drive neglected these days.. unless hooned about in by me.. Needs better driveshafts and CV solution tho as it eats them, and thats with progressive torque onset too!
 
  • Like
Reactions: Shoomakan
You must log in or register to reply here.

Similar threads

G
Low MAF values
Replies
1
Views
531
gixeron
G
JamieT_a3
Hybrid maf question
Replies
8
Views
1K
JamieT_a3
JamieT_a3
S
Values
Replies
20
Views
3K
Solberg
Solberg
A
Oil pressure values
Replies
2
Views
776
Andy123
A
B
Diverter Values/ Dump Valves
Replies
6
Views
2K
Banwell
B
Top
Back