8P3 Bi-Xenon Retrofit - DONE

kigglesss said:
I have gotten my 12.12.3a vag com and works fine. Got a reading form my car and little bit worried that I could not access the xenon range on the software. says was missing.

now i have ordered a converter cable from ultra HIDs. This place you have mentioned in bradford in this post appears to be the same place:

http://www.audi-sport.net/xf/threads/audi-a3-bi-xenons-retrofit-now-working.253305/

so the question now is do i need a new BCM to fit my bixenon lights?


regards
Kevin
Click to expand...

I'm sorry but I can't provide info or help unless you're using legitimate software, you can't rely on the information cracked and clone cables provide as it may be incorrect.
 
Sry darren to bother you again ..
I am in process of doing this retrofit but it seems that i will nees to change control unit for central electric cause my car is model 2011...
On kufatec page it says that most models from 2010 requires to change this unit....
Is your car model 09 or 10+ and did u change this control unit ?
It seems that u only used kufatec adapters to retrofit and some vcds coding ??


Sent from my SM-G920F using Tapatalk
 
hello, were did you connect the cable which goes from adaptors? i was told it fits somewher einthe bcm unit, would know were?

thanks
 
Hello. I really need help. I put bixenon on my 2007 A3 8P and bixenon doesnt work. When I flash just light comes on but shutter motor for high beam doesnt work. I have kufatec wiring and connected to A pin5 and pin 3 also D pin6 and pin 3. Still nothing.
With VCDS i coded as bixenon with additional DRL.
Wiring it says A5 and A7 (not A3) . I put in 5 and 7 and everything world fine except highbeam not. I put wire with A7 in pin 3 and and no highbeam and no DRL.
Also i have 4 wires to connect and all 4 are same thicknes. And ones that my car have in pin 3 are bigger.

Sent from my SM-G965F using Tapatalk
 
Darren92 said:
just finished my bi-xenon retrofit completed on my 8P3 Sport (with S-Line front bumper).

Difference from halogen is literally night and day and really sharpens the front of the car up.

A couple of wiring issues which needed sorted (crappy kufatec looms lol) but after these were fixed, all worked well.

headlight washers were also fitted at the same stage.

before;

View attachment 53491

during & after;
View attachment 53492 View attachment 53493 View attachment 53494 View attachment 53495 View attachment 53496 View attachment 53497 View attachment 53498 View attachment 53500 View attachment 53501
Click to expand...
Hi! My name is Mauro. I wold like to do the same to mine. It’s an 8p 2010 Tdi. I bought the retrofit plugs and wire but don’t know how to install it. Have you got a manual or can explain me please? Thank you very much!
 
Mauritzio said:
Hi! My name is Mauro. I wold like to do the same to mine. It’s an 8p 2010 Tdi. I bought the retrofit plugs and wire but don’t know how to install it. Have you got a manual or can explain me please? Thank you very much!
Click to expand...

It's been 7 years since I done this retrofit and can't remember everything. You should seek access to erWin ( https://erwin.audi.com/erwin/showHome.do ) which can provide wiring diagrams for the pins you need to change, does the seller of your looms not provide instructions?

My MY09 is probably different to your MY10 (assuming), as mine still used the old CECM compared to the newer style BCM.

I also ended up binning the looms and re-pinning/plugging my original car loom.
 
Last edited:
You must log in or register to reply here.

Similar threads

I
Bi xenon retrofit
Replies
2
Views
772
IloveMyRings
I
Omy193
BI-XENON Retrofit Help
Replies
2
Views
1K
Omy193
Omy193
F
AFS bi-xenon retrofit
Replies
5
Views
4K
Paullie
Paullie
P
Audi Bi Xenon Retrofit
Replies
3
Views
3K
P77HLP
P
T
Bi-xenon autoleveling retrofit
Replies
23
Views
6K
JohnS3
JohnS3
Top
Back