Do you know about the legality of your change you've made?
Not 100% sure to be honest but I believe some Merc's function in this way, as well as other brands. Am sure someone more in the know will be able to advise.
What mods have you done to your S3?I am Cirencester based, and have the VCDS cable. I've done a few of the above mods so should be able to help you out.
Exhaust flaps openWhat mods have you done to your S3?
With my 63 plate the default factory behaviour was to switch the DRL of the indicating side off for the duration of the turn signal.Thanks @veeight
Do you know what the standard behaviour is for Xenon's? I tested a 65 plate today and the indicator did not affect the DRL... I would assume this is standard?
*Flaps! Makes the exhaust sound meatier!
Exhaust flaps all open
===================1 – Engine module
Exhaust Flaps deactivate
Byte 9
Bit 2 - Exhaust Flaps installed check box default activated – deactivate it and save as usual.
If you can make it to North London I can assist with this.really want to give this a go, however i don't want to unplug cables below the car.
Can anyone help me out with this within the Watford/hertfordshire area?
would be much appreciated and would sort you out with a drink!
If you can make it to North London I can assist with this.
Afternoon gents!
I've never used VCDS but am going to visit a very kind chap on Saturday who has offered to enable my sub out and centre speaker (so I can add the Audi Sound System) via VCDS (he says he has some general knowledge of it but not a great depth). Would love to enable some of these mods too if they're relatively quick and easy. From what you guys have mentioned it would be awesome to have:
I've got auto fold mirrors so will try the dipped reverse and see if it works. Also something I noticed this morning, you have to switch the position to heat the mirrors, I swear this was never the case on my 8P A3? No biggy just confused me in my early morning daze!
- Oil temp in DIS (again why is this not standard!?)
- Wiper service position menus added to MMI
- Visual Parking Display
- Rear Light DLRs
- Exhaust flaps always open (YES PLEASE!)
Anyway, is stuff like this relatively simple? DJAlix I'll check out your sig link too and have a hunt
P.s. to the OP, hope I'm not hijacking, just good to know how simple it is to do
I am Cirencester based, and have the VCDS cable. I've done a few of the above mods so should be able to help you out.
If DJ Alix will go to an EU countries with DLRs off he will be fined In uk they didn't make this law becuse of stubbornity , UK didn't want to copy EU lawsIs it legal to turn DRL's off? And why would you want to do it?
Somone been complaining that you have lights on ?I believe that as of 2013 any road going vehicle has to have DLRs on permanently from ignition 1st position. Some EU safety thing.
I have recoded mine so they are off in light switch position 0 so I can sit in the car using VCDS etc etc without lighting up the street in the evenings
What happens when you sit in a car with consumers, for example lights, on while trying to code? The battery drains...Somone been complaining that you have lights on ?
I think you need need to use your brain my friend. DRL’s off in zero switch position = both front and rears off.... so that they don’t drain the battery while coding or maybe while washing the car with radio on etc etc. Why no just use the MMI menu option? Switch is fasterIf DJ Alix will go to an EU countries with DLRs off he will be fined In uk they didn't make this law becuse of stubbornity , UK didn't want to copy EU laws
Audi and other german cars started to make lights still on as drivers constantly been forgetting to turn 'em on and being stopped and fined by police
And they STLL are fined with old cars before 2012..
But DJ Alix wants front DRLs off but rears he wants on .. weird ¯\_(ツ)_/¯
Aaah sorry thnx for advice , I will use more brain I thought u have front off and rear on in zeroI think you need need to use your brain my friend. DRL’s off in zero switch position = both front and rears off.... so that they don’t drain the battery while coding or maybe while washing the car with radio on etc etc. Why no just use the MMI menu option? Switch is faster
When you need to run a car on battery for an extended period of time turning off all possible consumers helps to slow battery drain.Aaah sorry thnx for advice , I will use more brain I thought u have front off and rear on in zero
But don't worry, about battery drain. LEDs takes about half of power than old cars bulbs
I don't have LED control in MMi ..
Am gonna have great night , thank youWhen you need to run a car on battery for an extended period of time turning off all possible consumers helps to slow battery drain.
Thanks for your constructive comments, you have yourself a great day now
I think you need need to use your brain my friend. DRL’s off in zero switch position = both front and rears off.... so that they don’t drain the battery while coding or maybe while washing the car with radio on etc etc. Why no just use the MMI menu option? Switch is faster
Guys can you rather tell me how to set radio to mute when I start car?
I HATE when radio starts automatically with engine
Thnx
HiI noticed this issue was fixed when my MMI software was updated to allow satellite view with the replacement of Google Maps. If you are still under warranty, it might not hurt to give Audi a call and see if they can fix the issue via software update.
info-what?I think that the only way to prevent that is to turn off the Infotainment system when you turn off the engine.
Yeah I know that keeps screen down .. I just need that volume would be at least on 1 all the time .. never mind .. it cannot be done just searchedPress and hold the volume knob on the centre console. It turns off the radio, satnav, etc and displays "infotainment system off" on the screen between the speed and rev counter.
Thinking about it, it may say "Entertainment System", either way the screen doesn't pop up when you turn on the ignition.
no itis like u accidentally will bash on it.. and you don't realise, but that's not the case audi set it default to 3 which is loud.. I was thinking set volume to default 1 in VCDSSurely it comes back on at whatever it was on when you turned off the ignition ?
For No 4, What is the VCDS coding change required to do this ?In no real order, and only the ones available via VCDS:
1) Beep on Lock / Unlock with MMI Menu (cannot be done on 2015 cars)
2) Visual Confirmation of Comfort Closing
3) Visual Parking Display
4) DLR's Off in switch position 0
5) Auto Daylight Savings Time
6) Needle Sweep
6) Oil Temp Display
7) Rear Lights are DLR
8) Fog Lights as Static Cornering Lights
9) Disable Central Locking Auto Un-lock when key removed from ignition
10) DRL Brightness while indicating
There are so many more options tho... I would suggest reading the main VCDS thread and checking out the document linked in my signature
DRL off with light position "0":For No 4, What is the VCDS coding change required to do this ?