- Joined
- Jun 3, 2015
- Messages
- 261
- Reaction score
- 41
- Points
- 28
An unsuccessful attempt to bleed the brakes with an Eezibleed kit this afternoon. Went as high as 25psi (Eezibleed max. 20psi) but couldn't get anything other than a slight trickle through the bleed nipple. Just as a reminder, all four brake hoses have been replaced and the ABS module removed.
Moved onto the manual method with a helper, manged to get a little more fluid through but still not enough. Then hooked up VCDS to try and push fluid through the ABS pump in ABS basic settings, but group 2 (brake bleeding) had an error and was unavailable.
Will have another go with the manual method one night this week as that seemed only method with any action.
Moved onto the manual method with a helper, manged to get a little more fluid through but still not enough. Then hooked up VCDS to try and push fluid through the ABS pump in ABS basic settings, but group 2 (brake bleeding) had an error and was unavailable.
Will have another go with the manual method one night this week as that seemed only method with any action.