S3 8l, the old Rota Grid question, HELP!

J Eyo

Polo GTI (6) R
Joined
Dec 10, 2013
Messages
220
Reaction score
18
Points
18
Location
Melbourne
Guys, Audi s3 8L, Ive got some brand new Rota Grid Drifts, 18x9.5 et38 (quite possibly THE worst et to get these in :S), running 225 tyres stretched. Fronts hit the strut the second I put them on, 0 clearance, rears, haven't tried, what spacers will I need? 15mm front, 20mm rear? Could I get away with 10mm, 15mm? (Ive heard rears can fit without spacers? I was thinking rear spacers just to have them sitting flush to the guards) I'll be wanting to lower these on coil overs very soon to, probably BC BR's, as low as they can get before looking ridiculous. But I've heard to many contradicting things, and the closest I've heard to far is 20mm front and back, 20mm on the front is going to look ridiculous :(

Any one got ANY experience with these, or anything thats just 9x5 et38, and how did these fit? Pretty sure I'm going to get the front rolled anyway
 
last guy i remember who had those wheels in that fitment was Donjon with a red S3. He ran 20mm spacers front and back

Think Pats3poa also runs Rota grid drifts 9.5J but they are ET23, don't think he used spacers, in which case you could get a way with 15mm spacers on your setup

could probably do what you like on the rear -- loads 'a room
 
I have run 19x9.5 with 225/35/19 tyres on the front with an et of around 25 and 19x10.5 on the back with a 255/30/19 tyre and an et of around 20 .. no rubbing even on full lock and slammed on coilies

I did try a 215 tyre on the front so the wheel could be spaced out another 5mm but it was too stretched for my liking
 

Similar threads

Replies
19
Views
1K
Replies
0
Views
531
Replies
65
Views
16K