Eibach Sportlines are FINALLY on.....

Tiffy

Tiffy

Registered User
Joined
Mar 3, 2013
Messages
363
Reaction score
89
Points
28
Location
Warwick
Well, where to start.

Ordered my Eibachs and got my mate to help me fit them.....turned into a bit of a nightmare.

Got it on the ramp and removed the wheels....First bolt we tried was the pinch bolt on the passenger side...SEIZED IN SOLID......

After trying everything for a few HOURS!!!!!....YES HOURS....we ended up removing the whole suspention set up and taking it to get drilled out.
While i was getting that done my mate fitted all the others as NOTHING else was stuck...Always the way.

Once back we got it all sorted in the end....But 1 bolt cuased a right headache.

Anyway, all done and im chuffed to bits. It drives SO SO SO much nicer on these then the OEM S-Line setup.....Definatly a mod to do.....

Heres the pics.....


Standard Height..

374561_10151292289102407_1879921837_n_zpsb7459fa7.jpg


IMG_2709_zpsdf6050c6.jpg


IMG_2710_zps37685c3d.jpg


On The Ramp getting some lovin..

IMG_2717_zps4bf2c817.jpg


All Done and freshly off the ramp....still needed to settle..

IMG_2718_zpsfc640539.jpg


IMG_2722_zps4d21b85c.jpg


IMG_2720_zps4d59b54f.jpg


IMG_2721_zps480f3e89.jpg


IMG_2723_zps8b981292.jpg


And all Settled down afer the drive home.....

IMG_2724_zpsc59528ed.jpg
 
Dude your cars too angry. I LIKE!!.

I do think u need to make the brake lights get slightly tinted. Not blackout
 
lovely stance on it now, looks great. all this talk of pinch bolts and seized ball joints etc is putting me off fitting coilovers!!!!
 
I helped replace my mates audi a4 cab suspension last week, and after asking the question on here, we replaced the fronts by just undoing the top strut bolt and dropping the unit out as one. To put the new spring and old strut back in, we put the spring compressors on, put a cable tie around the base of the actual strut to prevent is dropping down and jacked the base of the strut up, the threaded end comes through the top mount in the engine bay and voila :) no need to remove the pinch bolt.
 
  • Like
Reactions: max69vk
Cheers Guys....im chuffed to bits, it looks superb
 
very nice car looks great mate well done :hubbahubba:

must de-badge mine!
 
black s-line badges and all lights tinted
would finish it off
 
audi upgrades
Looking good pal, agree with Bez though, tint and black out everything!! Will look super stealth!!
Great look mate
 
Don't want it to go too black, will look a bit chavvy. Going to get silver RS4 mirror covers I think.

also it was rebadged from the factory....
 
Well done fella, defo needs black badges tho':redface:
 
personally, i think murdered-out cars are done to death... i agree with the mirrors, get some contrast in there ;-)

goose
 
vorsprung durch tuffness

very very menacing. love it
 
Cheers Damian....

I pulled up at the petrol station the other Sadat and some old boy who was infrint got out and said my car was intimidating, lol
 
Just read that post back and as I posted it from my phone it reads like the Policeman from Allo Allo... Lol
 
  • Like
Reactions: jdp1962
i want these too, cures the reverse rake
 
You must log in or register to reply here.

Similar threads

K
Eibach sportlines 45/50mm -- are these legit????
Replies
1
Views
507
desertstorm
desertstorm
J
Do Eibach Sportlines fit a 2.0 TFSI Quattro??
Replies
7
Views
642
JBrad9
J
Chris-Vspec
Eibach Pro Sportlines fitted along with Forge Diverter and Cupra Splitter
Replies
13
Views
1K
Chris-Vspec
Chris-Vspec
Triple.O.G
Eibach sportline on standard dampers
Replies
15
Views
3K
squinteye
squinteye
Cwt1990
Cupra lip finally on
Replies
3
Views
2K
Sean_
Sean_
Top
Back