Hi, can anybody tell me the name of the part circled in the picture please? Mine is really loose and the pipe is all dented, looking at replacing it. Thanks
Part name
- Thread starter Aidy06
- Start date
Turbo jay
Leather repair specialist
That's the air intake which funnels air to the filter, not sure what the part number is but its easy too take off so have a look on the back of it there should be a part number there.
Cheers buddy, mine seems goosed. It looks like there should be two screws maybe holding it in but there's nothing there. I can just pull it off, also the piping is crushed. Would this cause any problems at all?
Turbo jay
Leather repair specialist
Yea there should be two screws holding it on one either side,also you will need to remove the clip holding the pipe to the air box, then it will all pull off.
As long as the pipe hasn't punctured it shouldn't cause a problem mate.
As long as the pipe hasn't punctured it shouldn't cause a problem mate.
Thanks again mate, doesn't seem to be punctured so will just leave as is for now but keep my eyes open for a new one on eBay
Unless is properly squished or cracked I wouldn't bother getting a new one. Just get a couple of torq screws and save some money! Failing that get a cold air intakestart the modding!!
Been thinking of modding, bought car around 4 week ago now. Had other things to do first, cambelt change with tensioners and water pump, oil change, new thermostat, renew HPFP follower and DSG service all done now so onto the mods. Was thinking of a remap but car has 111k on the clock so thinking this could be a bad idea ha
