Hi everyone I got some 22s with 285/35/22 tyres but the front will not bolt on as they are fouling against the upper wishbone. I would probably need a 2" spacer to clear it but then the wheels will be sticking out the arch and look stupid.
I don't think a smaller 285/30/22 tyre will be small...
They aren't rs4 mirrors though so irellivant to this thread unless I have missed something which I regularly do !
The rs4 mirrors seem to have a silver powder coated on them, not sure of paint code though.
I have just put new private plates on mine and 1 screw on each plate was very rusty and a screwdriver was useless.
I just removed the other screw then bent the plate so there was pressure being the rusty screw and turned the full number plate anti clockwise, worked a treat.
The b6 seats have no seat occupancy sensors, if you want them you need to put the b7 seat belt on AND the actual occupancy sensor into the seat which means partly dismantling the seat to fit them which I didn't want to do as it's much easier to just delete it with vcds.
The airbags are plug and...
Well did the alternator clutch pulley today and learnt a good lesson.
I spent around a hr trying to get the new belt on that I bought off eBay, it was around 1" shorter than the belt I took off and could I he'll get it on by myself.
The old belt was still in good condition so I refitted that...
hi, i have a 2006 a4 2.0tdi with the bke engine.
i think the alternator clutch pulley is seizing and im going to change it, what i would like to know is has anyone done this without putting the front end into the service position ?
can the alternator be removed without the front end being in the...