Hi - on the connector (6 pin) that goes into the rear of the double USB port - which is Pin 1 & Pin 2 ??? or do you have diagram of which pin is which please....
Thanks
Thanks - yeah agreed - do you know any retrofitters in North Yorkshire area ??? or do you think you could do if I got it down to you but I would have to stay and hope to get sorted within the day... I just want it sorting or ill just put basic system back in lol - what ball park cost do you...
Thanks - I purchased all parts separately - I was advised what was needed !!
As you can see the fakra I have does not have power like your image - I power mine from pin 1 and pin 2 of the connector at rear of port !! have I got the right port ??
Sorry for all the questions and appreciate your...
Just checked with original Fakra cable attached and still nothing although power is reaching the port - so I guess I need to check long coding... is that right ???
Also can you confirm that I am correct that Pin 1 is + and Pin 2 is GND on the port that goes into rear of USB port...
If that's...
Thanks - the original Fakra cable is still in the car - shall I try that ?? Does that have to be connected at same time to get power ?? as I tried with just power cable connected and also tried with new fakra cable.... Will the old Fakra cable work that was connected to the original AMI...
Morning - please see attached images - I have added some info to the image named Voltage which is the diagram that you sent yesterday - I get 12v at the main inputs into the unit and when the green quad lock connector is attached for the usb power I get an output of 5.3v and can confirm I am...
Thanks for the reply whilst you sent that I was editing my last reply too lol...
It does have Smartphone Interface on the menu and if I remember correctly I can go to connection manager but it asks for wifi connection and does not see usb I think but I will check this in the morning...
I thought that had to be done through USB hence needing the usb to work... or is that done through VCDS too...
OK so here is a thought - I need to confirm that I am getting 12v from the power lead (green connector wires) before they go into the usb hub as I have not checked this as yet - would...
I'm in Boroughbridge, North Yorkshire - I had original MIB system in the car but have bought MIB-HS unit, 7" screen and control unit as well as the double USB hub - I would have thought that as it is MIB2 the usb would work as it wouldn't have been turned off OR is it because car didn't have usb...
Now there is a million dollar question as I am not that technological with VCDS etc.... I have someone do that for me - is that done through VCDS I guess ???
Ah me again - sorry misread the image - in the T12o section on your image I have red connected to Pin 3 (iPod detected) and black connected to Pin 4 (GND) however am getting no power from the USB ?
I have copied the red and black as in your image attached... so are you saying that it + & - ??? so do I connect those to pin 1 & pin 2 on the connector that goes into the back of my usb hub ?? if so that is what I have done but I don't get power....
Excellent - ok on the black connector that goes into back of the USB port which connections are power please - then I should be done :)
I think it is pin 1 for positive and Pin 2 for negative but I have done this and not getting power at usb - it is not charging phone and have tried 2...
Great I will sort it - I see wiring from china is wrong... also do I need the other cables in the green adaptor ?? are they for CarPlay etc... or does that go through usb one - maybe the others are aux...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.