Hi Guys looking at selling or swapping my Audi A3,
Spec as follows:
Misano Red
2.0 TFSI (BWA engine) Quattro, 6 Speed Manual
113k Miles and MOT until July 2020 1 Key & V5
Two tone Heated Leather interior (Black Red) Black Headliner etc
Bose Sound System with ipod connectivity
Climate Control...
The sensors been replaced, previous owner did it, found that the 6 pin plug has been cut out and joined together at front of engine, i found green pins in ecu but not the ones for the g247, pin 1 12v, pin 2 should be 12v, and pin 3 5v, the 2nd pin which goes to pin 26 of the ecu hasnt got 12v...
Hi Guys
Im having a couple of faults relating to the G247 sensor, can someone please tell me what pins the g247 go to on the ECU, i want to check the resistance and continuity, what would you guys say is a high resistance to be a cause for concern?
Thanks in advance much appreciated
Shaun
Thanks for the reply mate, the faults you describe has sort of happened to me theres been 3 times its not wanted to start, spluttering and popping etc, when i got the car it had loads of faulta but i read a post after changing the g247 sensor, the ecu would loosevan earth feed which was pin 14...
Hello bud
Just read your post about the fault you've been experiencing, i too have the same issue but what issues were you experiencing, im wondering if you could help me?
I will be randomly driving and any speed and its as if the the fuel cuts for a split second, before purchasing the car...
Thanks for the reply Samuel. I have a fuel filter here so will do that asap, i was gonna order a n80 up, the caps seal is worn starting to see cracks but nothing to say its not sealing will get one for peace of mind
Thanks for the reply mate. The g247 sensor on the rail was replaced before i got the car, im hoping they are linked, the only thing i thought might cause lpw pressure would be the tank module
Hey all,
I have a 2.0 bwa quattro and seem to be having a intermittent fault, it doesnt do it all the time but today i started it up after doing a 10 miles trip and it cut out, then whilst driving its feels like a bit of crap fuel passing engine was at 3k and then jolted down to 2800, i only...
Hi Guys,
I've recently become a first time Audi owner the cars a 2007 A3 with the BWA engine in, intially when i got the car it wasn't running at all and when it was there was loads of faults, turned out they had replaced the pressure sensor on the fuel rail, which for some reason the ECU lost...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.