Recent content by Shaun todd

You got all the bits for retrofit electric tailgate

I just used the kufatec loom as it was easier and keeps it all OEM as some of the relay bypass don't work 100% with functionality and register with car .as your car changes certain aspects when towing engaged ... Also if you pdc sensors most relay bypass don't work correctly with the towing

Would love to know about the pinout change in the headlight upgrade to FL bi-xenon drl . I've fitted them but drl doesn't dim and when I switch to auto or dipped beam I get sidelights/daytime running lights bulb error . Short to plus

Havi g it checked out on Monday just hoping I don't need to get new oil pump and shafts. Just hoping that the sensor I got because it was aftermarket is faulty aswell. Ive had the light for on since January so this is what's making feel like the sensor is faulty.

Hi there woundering if anyone could help me please. I have an audi a6 4f 2008 sline estate 2.0tdi BRE engine.my minimum oil light keeps coming on after about 10miles of driving from popping the bonnett as I now this resets it as it reckons you have done work to the car. So I've replaced bonnet...

Hi guys I have this problem but its low oil level changed the sensor as thought this was the problem and changed the 5amp fuse on the dashboard passenger side fuse 7 for oil pump and still the low oil sensor appears. Any help would be great. Oil level is perfectly fine and she is runni g fine...

My rear subframe bushes are on there way out how much you think I'd be looking at for them to be replaced. Me providing the bushes

I'm guessing you got a whole reel and cut down to 3 leds and soldered wires to. Do you have pics of we're you placed whole and the strip

Don't suppose you guys know the pinouts for the extra 6wires from the 3extra speakers I need to install into the original dsp amp plug for retrofitting bose EG: (two d-pillar speakers and centre speaker)

All sorted wired to the ignition fuse and all great..

I would love to do this to my audi a6 4f 2008 sline. Am j guessing the loo. Cable and seat pads or new seats with heating is all I need to retrofit and obviously a new climate control unit with the buttons.. No other additional wireing needed

Also thankyou guys for your previous help .no longer have all these faults apart from my camera saying not calibrated

Anybody share the coding for there auto hvac so I can get it eto display on my mmi screen again please

That's great advice cheers for you explanations will try tonight and see what it does..

Just curious what is aux. Heat (18) for and the control heads