Recent content by Rob45

Tricky , cheers for the heads up on the bars , I got them £32.05 ;-) I didn't know there are 2 notches ( location points ) either side up inside the door frame where the clamps position , just found them on mine , back windows have to open to see them . Cheers again

Ok cheers , I've placed a bid . Cheers for that .

Nice one cheers , so they don't sit in the gutter parts then ? Shall have a bid Cheers again

Excellent , cheers for that pic , I did think the rears would need opening yo fit clamps , was thinking of THULE locking type , still think my roof box will be to big for the S3 plus aerial would need to come off . Halfords set is £99.00 , Thule ones £150.00 How much for yours lol Cheers...

Daz, that what I was thinking so as said removed it and re fitted it but tried to fit over this foam part at the top but instead it went down onto the slotted strip it sits on which is just behind the foam part . Will try and get a pic tomorrow

Can't help noticing. My driver side door with window up. There's a gap between the glass and the top of the inner door card , not the same on pass side which is nicely against the glass . The driver died you can see like a foam strip , I thought it was the door car not been fitted properly as...

Ok cheers will have a look , would like to see some pics with them on , a few on google but not detailed enough . Cheers again

Hi folks , anyone know off hand what roof bars I need to carry a Thule roof box ? Pics would be good , would like to see how these fit back end as it's only 3 door , do the gutter rails need to be removed ? Also with a roof box , the standard aerial would need to come off , would a bee sting one...

3 mins lol haha mate nice one , well I never knew about those ones. I was undoing the runners from the base , 4 bolts one each corner , and yes , the Plastic trim at back , I've found out the hard way ... Shall double side tape that down !!! Oh well , job for another day now Cheers mate

So plastics removed from back , move seat forward , there are 2 bolts one each side in the runner guide , move seat back , same again , 2 bolts in runner guide , one each side , I then undone 3 plugs underneath , then moved seat back , but looking down the side , the seat belt looked as it was...

Jason , that's how I did it mate , but looks like seat belt part is on a runner inside a channel along side of trans tunnel , I could not shift it , was moving it all directions and was having none of it , all bolted back in now as the red mist was rising !!! And didn't get anything done today...

Can I remove the front recaro seat today as need to repair extension part and re dye leather i removed all bolts x4 from runners , unplugged electrics , will the seat come out ? Will it f@€k !!! Looks like inked the seat belt part attached to seat frame and other end located in a runner to...

Hi folks , not been on here for a while couple of help tips needed firstly the leg extension part on drivers seat , the leather covering has come away from the unit , anyone know how to remove this part so I can re secure the leather part , obviously seat will need to come out to tackle this...

Ok mate Nice one , just gearing myself up for this so need to know before hand as dont want anything holding me up ... cheers again ...

Have noticed pass side seat , back part is starting to creak and rattle , noticed there is quite a bit of play so am guessing it needs tightening up at the hinge points , i did have a look to see if i can get to the outside one but cannot see how plastic cover comes away .. I dont want to force...