Recent content by Poobear

  1. P

    Engine holding revs when releasing accelerator

    Strange, the cruise control still works though. So might not be the issue
  2. P

    Engine holding revs when releasing accelerator

    Thanks for the info, appreciate it .Any risk in deicing the car for now before getting the clutch switch changed?
  3. P

    Engine holding revs when releasing accelerator

    Thanks for your replys. The revs hold without changing gear, i could be in 4th and release the accelerator and still have the issue. I do not have to press the clutch down for this to happen. In terms of idle , it pretty much sits at 1200 rpm.
  4. P

    Engine holding revs when releasing accelerator

    Strange one, 1.9tdi 130 , 02 Audi b6 Just this week the car holds revs for around a second before dropping when you release the accelerator. Feels very similar to leaving the cruise control on for a split second and happens at all speeds The car also suffers from a lumpy idle and just...
  5. P

    Gearbox mount change

    Just finished this this morning. Answer is yes, 3 bolts each side, 2 bolts on the gearbox mount. Drop the cross member, exhaust gets in the way slightly but is doable. Then undo the 3 bolts holding the mount to the gear box. Can be All done in a couple of hours .
  6. P

    Gearbox mount change

    Evening all Can anyone confirm if i have to drop the gearbox mounting subframe to change the gearbox mount? Looking at it i dont think there is any other way to do it.? Thankyou
See more
Top
Back