Recent content by Phoenixx2

Thank you. Will keep an eye out. Thats fair enough, just thought I would offer. :relaxed:

Agreed. Will source the correct equipment and start fresh. Since you have been so helpful DJAlix, do you sell the kit as a standalone? If so I would be happy to purchase from youself and tackle the fitting myself again. If you're interested in the old install I have, would be happy to send it...

Ahhh I did wonder, the more I looked into it the more I thought I had the wrong equipment for my year... But as I had the items present and it seemed it could be made to work (albeit with the correct module) I decided to procceed. Will remove the current module and see if i can recover some...

Thank you DJAlix, If I was closer I would pop over for sure! Ok.. So I have gone over everything as suggested and rechecked my steps to ensure I've not missed anything. 1. Wires installed from RVC in boot handle to control module to MMI. 2. 6C Module installed in boot & connected to 12v+...

Hi RAF_S7! Love the look of your S7, you've done a very nice job with that man 4.0T is a great engine! Haha yes, it's an expensive hobby indeed but you have to have an outlet these days, more so than ever now! It will be a slow road to eventually get it to where I would like, but I would like...

South west, near Plymouth.

Made some good progress today and I have got the RVC to work! As DJalix said the Adaptions had not been carried out on the VPS so that has now been done. In the CAN gateway I had two 6C's ticked and two 17's ticked so removed the tick on the first of the two and this rectified the faults I was...

Hello DJ Alix, So had another look at the connections behind the MMI just to be sure and low and behold CAN hi & low were incorrect! This has now been rectified and I can now see the 6C module in VCDS. I must admit I followed the Kufatek instructions which are pretty good but I got a bit lost...

Hello NHN, Thanks for your reply. Just auto scanned the car and something is definitely not right... See attached.. https://wetransfer.com/downloads/fec153b40ac5953c40a3a1788d9f9d8220201001142102/72a73c0788367a8a0db08c09d162e82a20201001142102/f9773f One is a auto scan I carried out end of...

Morning all, So I have carried out this retrofit in my A7. Installed the rear view camera, kufatek fakra cable from boot to camera module then to the MMI unit as per Kufatek instructions. I have VCDS so coded as per instructions also, but the camera is not working. It seems the issue...

Good day to you all! Thought it was overdue to introduce myself. My name is Matt & I live down in sunny southwest of England. Recently purchased a A7 S-Line Black Edition 2016 3.0Tfsi with 43K on the clock with me being the second owner! :icon thumright: Coming from a A6 3.0Tdi C6 & before...