Recent content by MarcoV

Hi everyone, I have a question regarding a second hand abt engine control unit Retrofit. The unit I required is for a 2014 1.4 tfsi Audi a3 dsg. I have a 2013 1.4 tfsi manual gearbox a3 8v. the guy I bought it from does not know anything about it but after I installed it the car did not give...

Hi everyone, I Retrofitted some OEM bi-xenon headlights on my 2013 sportback pfl but its all not working like i hoped. The lights are oem audi number 8V0.941.005 I use the wiring harnas from Alieexpress https://a.aliexpress.com/_mseGrGK The xenon works but after a few seconds they turn of...

It is indeed on the other side. Maybe for your own good you better change the housings and waterpump cambelt. Don’t forget the thermostat both Verzonden vanaf mijn iPhone met Tapatalk

I am Rexhunt that’s my post.

I think you have a facelift Audi 3 and a Mmi high. It is not possible. Only with the old rvc prefacelift.

Who can help me with the coding? I have vcds. Anyone? Hallogen—> bi-xenon Verzonden vanaf mijn iPhone met Tapatalk

Anyone got a vcds walktrough? Want halogen to bi xenon retrofit. Got wires connected but led does not work.

Wanting to do the same! Any luck to get it working ? @iandressc

How do I need to bolt on these skirts? Any help please?!

I have done coding but do not get camera working. Anyone tips? Rückfahrkamera „High“ freischalten (Adresse 6C) Kamera sollte nach Abschluss noch mit einer Kalibriertafel kalibriert werden. STG19 > Verbauliste > STG 6C im Gateway anmelden STG5F > Anpassung >...

I have a stock A3 8v bumper with fog lights and want to change the bumper for sline. I bought the fog light inserts honeycomb style but they are different in the corners then the normal ones. Do I nee other fog lights for a sline bumper?

Do you or anyone have the part numbers you need to get it working like the Italian dude?

Got camera installed, can high and can low soldered on mmi plug wires. Camera cable black and transparent clicked in plug from mmi plug. White fuse cable inserted in fusebox and put in fuse. Anyone coding tips how to activate camera? I already have the pdc front and rear with dynamic lines on my...

I got it sorted by a vcds professor! One by one the lights turned of by every code he made in vcds. So yes it is a coding issue when swapping led for hallogen! Thnx everybody and hope this helps anyone trying to do the same!