Recent content by marcgj

hi guys, i had my air con recharged today (never worked since i bought it) as you can guess it didnt work..... ive been reading threads for atleast an hour car is a 2002 1.9 tdi 130... we checked the top 3 fuses...all nice and shiny.. he checked for power at the compressor... nothing!!! he...

a3 8l 1.9tdi

ok tufty cheers, i dont want to spend loads, these cost me £50, its my dialy drive so was just after the lowered look, are s3 springs lower and do they fit?

hey guys i got some -40mm h&r springs a while back and fitted them, although i love the look its soo harsh...the front seems to bottom out...is this normal? are any other kits better?

managed to get hold of a single din centre console, will i have to purchase single din climate control/ashtray etc.... will my cup holder part fit? thanks.

hi guys, i have the facelift on a o2 which currently has the synphony double din,what can i replace it with? thanks.

I'll watching with interest as I'm into my audio, looking to fit my 8" dc audio sub into something similar it works in a sealed enclosure of 0.6 cut.

I should imagine they'd be in the foam, I've just developed some standard leather furniture for dfs with heated seats and backs and the element had to have a layer between it and the leather recommended from the supplier.

Mine picks up from 2k and is flying by 2.5k. (130pd)

right guys, same old temp gauge symptoms,..gauge not moving..changed cts which resulted in it moving, but as usual it hovered around 70-80 degrees and never reached 90,(thermostat stuck open) so i went and bought one from my local lds..."continental direct thermo" popped it in and it seems as...

right i managed to get a spare hour today so i took my bumper and drivers side headlight off to investigate, to which i found the usual .......some idiot has been at it, they fitted the clip wrong and basically snapped a leg on the clip the joiner was basically 90% on its way out... so i...

right i managed to get a spare hour today so i took my bumper and drivers side headlight off to investigate, to which i found the usual .......some idiot has been at it, they fitted the clip wrong and basically snapped a leg on the clip the joiner was basically 90% on its way out... so i...

Thanks for the lengthy reply, I'll probably go dmf. Can get a Sachs kit flywheel/clutch/bearing and all bolts for £299 and then £130....so not bad at £430 all in.

I know lol, I've read about the rattle also possible crankshaft failure but nothing actually documented.

That's 1 for the dmf lol. The guy that's doing it (as I can't be *****) said he's done loads with no problems and he's the local clutch/gearbox expert, he's charging £130 to do flywheel and clutch (just fitting)