Just a thought on the cruise - the stalk has to be in the 'on' position which doesnt give any indication that is on. I think its either pushed back or pulled towards you (as if you were flashing your head lights). Then give it a try.
+1 for this problem.
I had these installed for a lot longer, and during the winter now I had two dry vertical lines from the number plate lights up to the back window. Took the bulbs out this weekend and the plastic has melted. Needless to say I have now replaced the bulbs with the originals...
Mat - I asked a similar question and somebody gave me this link. Although I am considering the job myself, this will give you an idea of whats in sotre.VWVortex.com - Koni Coilover Install DIY
+1 VCDS works everytime, had it done twice now to my car. However, you need to be sure to select the correct service reset in the big list, some are for european countries, some are for variable or fixed servicing etc. If you get the wrong one it wont clear it.
As above - does anybody have a step-by-step guide with photos? Or a guide for replacing springs? Or installing coil overs?
Have tried searching but can't seem to find anything.
Looking at perhaps lowering but I would like to know what I am dealing with before I start - would I need spring...
As this requires replacement of the windscreen, does anybody have the Audi part numbers of the glass with the bracket already pre-installed? With sunstrip options? Thanks.
OK - so finally got to the bottom of the problems...
Turns out the part numbers match an A3 2.0T FSI Quattro and are NOT for an S3. Hence why it may be longer and unable to fit it to my car!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.