Recent content by JorKSX

So im having little problem with my passat, 1.9tdi engine 85kw and year 2000, variant. When car is running the voltages are like 14.5 so the alternator is good. Also battery is good for sure. (car is build for subwoofers and there is 3 extra big batteries but they cut off when I shutdown the...

Sold the car with this problem, Guy who bought it wanted only the transmission because its one thing that I changed and was fully working. But I did not have place to remove transmission anymore so I gave the whole car :) Before this I had so much problems with this car and my wallet was empty...

There is still same code. 01376. There is no air

the strong knocnking sound is now fixed. the flywheel was lose. I dont know how, but I removed transmission and checked thats its lose. Why it wont start? Pump broken?

Yes Im sure about that

Oh yeah. there are 3 pins, should be named 1 2 3 from the pin 3 to earth i get 0.1v when ignition is ON all other pins give me nothing

So I have fault code 01376 engine speed sensor for injection pump. I removed the engine speed sensor and disconnected it. Still 1 fault code. If I remove any other sensor I get new code. So I think this ESS is broken somehow? I did mesurments and it says 832ohm. Somewhere I read that it should...

theflywheel is fine. I still think that the pump is somehow broken. it wont pump disel into the engine. But can I somehow check it so I can make sure about it? the fault code says that pump wont deliver info to ecu

I go check that out

It did not help me. It cannot be timing because before oil cange. Engine was running no problem. I even checked timing then. After oil change the engine was running but badly. The timing was still OK. Then I removed rocker cover and after I put everything back together it wont start. Like the...

Hes last seen 17.06.2017 on this forum.

I asked him like week ago. No answer

Only code is 01376. It wont say anything about soeed sensor. Only that speed signal for pump....

It was starter motor. I changed it and the noise is gone. Now the problem is why it wont start. It gives me always fault code : 01376 ( SPEED SIGNAL FOR INJECTION PUMP DEFECTIVE) I have changed the engine speed sensor, and checked the wires.

yes I know, I deleted all codes. thers no codes anymore. The metal hitting thing is Starting motor, its broken down what I can tell and when starting it jumps over the "theeths" But why the engine is not starting I dont know that. I changed engine speed sensor. no effect.