Recent content by Grale1

  1. Grale1

    Wanted S3 8L Front and Rear door cards

    Anyone selling a mint set of black leather door cards with Bose speakers? Willing to post or a couple of hours drive from Redhill Surrey. thanks
  2. Grale1

    Rocker cover studs need helicoil

    Cheers for your reply guys, I got the parts together to do the job and then thought twice about it so booked it into a local Audi Independent specialist and they are going to do the job for me using time sert, booked in for four hours but said might take a bit longer. ‍♂️‍♂️
  3. Grale1

    Rocker cover studs need helicoil

    As title says, I bought my engine second hand all built up but the studs for the rocker cover were removed and different style bolts used, cut a very long story short now, I need to replace the gasket to stop a oil leak around cam belt area by looks of it, I would like to reinstate the studs but...
  4. Grale1

    Pulling to the left

    Hi guys haven't posted on here in ages. I'm still having issues with the car pulling left both when coasting and when on the gas pedal, only way I can describe it is you can feel through the steering wheel that the front left kind of has a heavy feel to it and the power going to that side. I've...
  5. Grale1

    Silver project top mounts

    Cheers guys, much appreciated that. The car needs these fitted so I can get the alignment sorted as its all over the show.
  6. Grale1

    Silver project top mounts

    Hi guys, I've had a set of these adjustable top mounts sat in my garage in there box for a year or so. It's got to a point where my car tracking is really bad and just all over the show. I'm going to be fitting them asap but anyone who has fitted them have you left on the oem bearing that sort...
  7. Grale1

    Sandblasting & Powdercoating Brembo's.

    I'm looking into painting mine, are the seals that house the Pistons reusable? Or do you need to renew them and the other seal under piston iirc??
  8. Grale1

    Pulling to the left

    I'm also having an issue with mine pulling to the left, I will be replacing a lot of components over the next month because of the age of the car and hopefully it will help. I'm changing engine mounts also as well as fitting rear adjustable tie bars and adjustable top mounts along with...
  9. Grale1

    Wellycooler FMIC Install Help(S3)

    I might be able to get some over the weekend as it means taking front bumper off again
  10. Grale1

    Wellycooler FMIC Install Help(S3)

    inused 90 degree 76mm down to 63mm silicone bends from my intercooler outlets mate
  11. Grale1

    19" Wheels

    I'd have too take two wheels off to see what the offset is, as it should be on the back right?? ET??
  12. Grale1

    19" Wheels

    I have 235/35/19's 8.5j on front and 9.5j on the rears
  13. Grale1

    badger 5 tip

    A little trick to tidy up the cut jagged end would be to tighten a jubilee clip to where you want to cut then just go round the clip if that makes sense as it will clean that end up nicely. Good shout cleaning the oil out also
  14. Grale1

    How to: Poly Filling Engine Mounts.

    How does it feel in the car? I'm currently looking into this process as my downpipe knocks and vibrates through the whole car on left turns and its doing my nut in and was wondering if this would help some of the engine movement. Si
Top