Recent content by Emzy93

As the title says, really need some expert help here. <---- video of the problem This missfire problem occured after changing all the required hardware for revo stage 3 (k04 turbo). It did run fine for some time while i was waiting for a local tuner to put in the revo stage 3 software. When...

What nluk100 said. I have a full milltek turboback with de-cat. The car didn't like it, but after a revo remap it was all good.

Ask the tuner that flashed your ecu, could be a fault in the revo software.

Could be alot of things, take a closer look at this: http://wiki.ross-tech.com/wiki/index.php/16683/P0299/000665 When found in VW Golf/Jetta (1K): 2.0l CR-TDI (CBEA/CJAA): Verify the mechanical part of the Exhaust Valve Control Module (J883) is not seized or binding.

Try to change the coil and sparkplug over to an another cylinder, and see if the problem occurs on the "new" cylinder. If missfire on cylinder 3 still occurs you could have a fault in the wiring for the coil on cylinder 3. Other causes could be fueling. Unplug all the coils and take the...

What model year uses steel ones? The TSI? My local dealer wanted 120£ for a set of 4 new ones. (in plastic)

As the title says, can i re use the plastic mounting ring on the injector even if the "arms" on it is broken? I'm changing out my injectors for new S3 ones in my 2.0TFSI

Hi, my 2.0T A3 suddenly started running rough and after a scan with vcds it says cyl 2 is missfiring. Pretty sure its the coil pack or plug. So i'm gonna borrow a coil pack from my dads TT to get the car home tonight. As for new coil packs, is there any reason to buy the red coils from an R8? I...

I see, my mom has an 07 TT with concert, does it have the 32-pin connector for AUX? I can try to code it after work.

Quadlock?

No one i know has rns-e in their car, but I am going to so some instrument coding in my dads A7 soon.

Genuine cable, and yes i tried locking/unlocking car, engine on/off :/

So I got vcds in the mail today, and it seems like my RNS-E doesent respond to the new codes. I've tried to force restart the RNS-E between each coding and still no AUX. I even tried to disable the CD-changer and the RNS-E still had the cd-changer option after the coding. (In vcds it said coding...

Going to get an OBDII reading tool soon. Thanks for all the help and information :)

My A3 is a manual, my dads TT has a dsg.