Hi mate
Youv just been recommended on a thread as the go to guy for suspension.
I’m looking to upgrade my s3 8L and was thinking of the bilstein/eibach kit. I have had coil overs in the past and found them to be too firm for everyday driving. Would you recomend the b12 kit or is there an alternative out there ? Prices would be great, including delivery to cambridgeshire
Thanks
Adrian

Sorry it's a saloon

hi damian, im running 2014 a3 8v quattro tdi 184 with eibach sportline springs. only issue is front springs are too short for oem struts. whats my options? when front springs fitted to struts the spring isnt clamped by the top mount. thanks

Hello, hope you're well. I'm looking to lower the front of my 2016 S3 8V using the eibach kit. Do you sell this?

Cheers.

Hi mate, I’m looking at buying a C7 A6 SE, and would like to drop the suspension to S-Line ride height - or a touch lower. But not too low, I like the OEM look. What would you recommend? Also, I would like to fit some aftermarket RS6 20” alloys, can you recommend anywhere to get them?

Thank you, James

Hi Damian, can you give me a price for the Eibach Pro kit on the B9 S4 avant

Thanks

Kieran

Hi its the usual I guess lol, have a 2011 audi. A3 black edition, it's on standard 18" rotas but want it lowered only using springs. I'm guessing it's lower than normal a3s and heard people saying I need 45 to 50mm drop on the springs...

Evening! Been sent your way for some springs. I am looking for some H&R 25mm all round drop for my S3 8P Quattro. I was wondering if you were able to help. Many thanks, Eren.

Hi there. It's a 2016 Performance. 18,000 miles. Will confirm reg by email later this week if that's ok.
Fred RS

Hi Damian I'm just enquiring about some Eibach springs for my A4 1.8tfsi 2012. I have 19inch Stuttgart st9s fitted and looking at 40mm drop. What price would they be cheers

Hi, what lowering springs would you recommend for a PFL s3 saloon 64 plate with Mag Ride? I'm looking for a decent drop and not to firm. prices with UK delivery please.
Thanks, Rich

Hi Damian, do you still sell a short shifter for the 2007 A3 8P 2.0TDI? Thanks

Hi, I was wondering if you could help me find the part number for A4 DTM front springs? I bought Suplexes with part number 8E0411105EJ (S Line, I think) before but they seem too bouncy and not stiff as I expected.

Hi Damian,,i´ll traveling to Germany next month. I i need to buy a set of coilovers for my A3 2.0 TFSI Sportback stage 3. actually i´ve OEM shocks with Eibach sportlines,. I´m looking for a coilover to use as a daily and track, between AP and Vogtlands wich is better for my use? and how much the cost of one of this sets shipped to Berlin. ( do you have Tax free option? )
Thanks

Hi Damian do you have any eibach lowering springs in stock for a 2007 a3 2.0 tdi sportback?

Hi Damian
I'm looking to make my A4 (B7) 2WD 2.0T ride less crashy as the ride quality is back breaking. After reviewing your historic posts, I notice you recommend the B12 Prokit more often. I'm happy with my current S Line height but don't mind a slight drop, if I take the B12 option would it improve ride quality whilst retaining the handling?
And, how much would it cost? what else provided in the kit?
Thanks

I'm looking at buying your APEX RDX COILOVER SUSPENSION KIT but I'm just wondering if you have an pictures of any A4 B7 saloons sat on these coilovers?

Hi
My Alpina B3 biturbo is fitted with Bilstein suspension - developed by Birds BMW with Bilstein. This is very good, giving a compliant ride + good handling, far better than stock.
I am considering an A5 3.0 tdi quattro instead but I found the (car) low speed bump compliance a bit firm.
Can you suggest a kit that would improve the compliance but retain decent handling?....Bilstein B12 or other?
Cheers
Martin

Hi there! What price could you do me for a set of H&R 10mm & 12mm hubcentric spacers and wheel bolts for my 2011 A3 8P FWD TDi Sportback? I would also be interested in the Whiteline Anti Lift Kit. Many thanks!

Hi mate do u sell Coillies for the front only . As I may need 2 front rather than a set . Let me know thanks .

Hi ... I am looking to purchase some KW Variant 1 coilovers for my Audi A3 8p along with H&R 10mm and 12mm spacers ... Have you got any deals on for tomorrow's cyber Monday?

hello, what price could you do a set of H&R 10mm & 12mm hubcentric spacers with the longer bolts to match for my 2012 S3 8P SPORTBACK? thanks

hi damian how much for 10mm and 20mm spacers for a s3 8l bolt on ones for the rear in h&r track

Hey there, I hear you're the person to go to!
I have a 2004, 1.6 A3, looking at coilovers, potentially lowering max of 100mm, any recommendations? Budget around £350 tops, although could probably stretch to £400 if they would be the world better.

hi damian....

next week im going to be buying some coilovers for my AMK S3. Just wondering what you would recommend.....

at the moment its a toss up between AP and Apex RDX's. I know the apexs are slightly more, but i don't know if that means they are better....
what are the prices would you do on each of these?

Regards.........

Hi Damian
Im after some AP coilers for my S3 8L Apy 2000 plate for a full suspension setup... i would need tie bars also i believe and is there anything else i would need?
Also i have had a look on demon tweaks and they off a finance option (As I'm a little skint as saving for a house lol)
would you be able to quote me happy Lol ???

Hello Damian I'm after some ap coilover a for my Audi A3 2.0tdi 2010 reg, I believe these are the 55mm strut diameter? Have been told your the guy to speak to
Regards Danny.

How much for h&r lowering springs for and audi A3 fwd part # 29260

Hi Damian,
I would like to order a set of Eibach Pro Kit lowering springs for a 2008 Audi A3 1.6 Sportback,
would you have these in stock and what is the delivery charge to Northern Ireland.

(**** it just orderd them, could you check that they are correct and a possible eta)

Thanks
Mark

Hi Damian - your thought and ideas on suspension mods for my A4 2.0 Tfsi S Line Avant Quattro Special Edition 107K miles. Has the S Line Special Edition 18" wheels
Currently on standard S Line springs & dampers and suffers from the typical stance issue on quite a few S Line Avants. The rear springs have settled and looks about right, the front sits a good 30mm too high. Gary

Hi Damian, I've recently bought an a3 1.6 petrol and looking to lower it about 40-50mm, not really wanting to spend much more than £300-£350. Just wondering if you could tell me what your best options would be within my budget?
Cheers Neil

Forgot to mention Damian its had the S3 facelift conversion done on the car it has the 18" rotor arm replicas 18X8.0J offset 45.Would like it to sit low as the s3 or little bit lower. with a good comfortable ride without the bounce when driving.Regards

100k

How many miles has it covered?

Hi damian

appreciate your reply back , as i have spent a good fair amount of hard earnt cash i think £200.Regards

Morning, I'd say the best option would be a good quality springs and shocks kit. Did you have a budget in mind?

Hi Damian recently purchased a3 tdi sline 170 3 door FWD. The problem i have it sits too high when i look at other s lines they sit lower !!. the suspension is very bouncy when driving even on level roads like a bouncy castle. I feel the setup fitted to the car may not be s line set up !!. Can you please tell the best option to lower the car front and back also having a comfortable ride and not bouncy ?thanks

Morning, PM sent.

Hi Damian.
I'm looking at getting the Eibach Pro Spring kit. My car is a 57 Audi A3 2.0tfsi SLine (FWD). For my car there are 2 options, the only difference is the front axle weight. My car manual says the max front axle weight is 1080kg. Do I need the spring set for 1065kg or 1165kg???
Hope you don't mind helping me out. I'll get them from you anyway, any discounts coming up?
Thanks for your time,
Rob

We don't have them in stock here but we can order them from H&R for you.