Recent content by doce

Anyway, that crap ends up in the environment, one way or another.

I am currently using a catch-can and since the winter coming, due to short journeys my catch-can fill very quickly with a creamy blow-by. I came up with the idea to remove the catch-can then crankcase breather hose just redirect to the floor (venting to the atmosphere) and close another end to...

Small update, after a while and some testing, researching, conclusion is that the compressor is probably dead. Everything is fine with wiring, fuses, sensors, etc but with compressor bypassed and connected directly to the battery, everything is same and compressor not kicking on. So, now it can...

I have a strange problem with my AC and it's driving me crazy especially now during hot days. I can not turn on AC, compressor or fans not kicking on. The first thing I thought there is no refrigerant but after regassing still nothing changed. Next I checked the fuses and every fuse is working...

This one: 06H145710D

Bosch or Denso will be just fine. I replaced mine with Denso.

Nope, it is N80 valve, can be related but before any replacement, check MAP sensor wiring first.

Unfortunately, I also made a similar mistake. In the end I fixed the problem myself as I advised in post #6.

Problem is not in projectors, if you like super bright low beam, find some 25-30w led bulbs.

O2 sensor codes (p0140, p0141 etc) are not too expensive to fix but p0420 is expensive.

Check valve cover gasket or vacuum leaks.

As I can see, you have pcv valve bypass and catch can, it is quite different than my pcv. I am thinking now about some modification in installation order. Maybe it would be better to connect catch can inlet hose directly to valve cover than catch can outlet hose to pcv non return valve and hose...

Engine is different but installation procedure is similar, thx. :) So, pcv valve hose goes into catch can inlet and outlet from catch can to airbox.

I want to install oil catch can on my 1.4 tfsi but I have difficulties to understand installation order. Please, can anyone help me? This is pcv system in my engine: And this catch can I want to install: So, I have one hose from air filter box attached to pcv valve and another hose...

It works, just copy link and open in new tab.