Recent content by danclarke

SOLD! Sent from my iPhone using Tapatalk

H&R anti roll bars near new condition, were fitted to a project car that got broken before completing, will fit 8P S3, A3 Quattro, ideal for mk5 golf/Leon AWD conversions, 24mm front and 26mm rear, best a to roll bars on the market. Paid over £400, asking £350, located in Birmingham. Sent...

Hi all, been a while since I posted on here but I have a pre facelift S3 currently breaking most parts available as I have only had the engine (just block) and seats out of it. The S3 has a few mods, wietec springs (sits quite low and look fairly new) & monroe rear shocks Drilled and grooved...

few pics of mine with new tt rimzzz!

few pics of mine :icon_thumright: bring on the summer...... bring on the mods :rockwoot:

cheers for that mikeyboy thats answered my question,so a sachs or helix clutch it is! thanks again. is it common for the clutches slipping after remap on the tdi's?

hi, iv had my a3 2.0 tdi 140bhp for 3 weeks now, last week i had it remapped by custom code and now it slips the clutch when you try to put the power down, its just ticked over 100,000 so is probably due a new clutch but just incase i put just a standard clutch in i wanna know if the standard...

where can you buy the hybrid turbos from? as im getting my a3 2.0 tdi 140 mapped tomorrow and if im not happy with the results im looking into going the hybrid route, i hear 240 bhp is achievable?

10mm just on the front really to clear it from the shock, i havnt got any spacers on the back i need 10mm tho just to make it match the front, yes they are 225/40/18

thought i was :happy: ive dropped the front while i was changing the wheels, the rear coilovers are a nightmare tho as i will have to remove the spring to get the cup out to adjust it so thats a weekend job, i only collected the car sat and was raining when i put the wheels on but i wanted them...

not a sportback or red im afraid but will give you some idea?

thanks for fast reply, at the moment they have 245/40/18 iv ordered 225/40/18 i thought they would give enough stretch to give the rim clearance? they are falken tyres aswell and iv had them before and the sidewall looks stretched on them even when they are the rigt size?, i will post pics up...

hi first of all, iv just bought a new a3 8p 2.0 tdi 53 plate stepped up from a 8l 2001 s3, i have a slight problem and need a quick answer so i can get it sorted so here goes, i bought some new tt wheels for it, ET 53 9j wheels, problem is the rim is too close to the suspension and need to...

im liking the smooth rear look so not putting any badges on! engine pic 4 those interested?

hi havnt been on here a while so thought id reply. basically i painted the chrome inner part of the headlight black to darken the front abit (good mod imo) how to.... i took the headlights out the car and took the little metal clips off the edge that hold the front plastic to the back plasic...