Recent content by cstmn

Thank you for the information, Paul. First I bought oil pump drive gear for TFSI crank. I knew for this difference. If I put 81.5mm or 82mm pistons on this 2.0 TFSI crankshaft, i don't have any problems with them (if those pistons are specific for stroker engine) and head gasket is not a problem...

Good morning to everyone. I bought TT 2008y. 2.0TFSI crankshaft (6AAJ), which is forged. I usually know that crankshaft's stroke 92.80mm. After that i have some question. I have S3 8L Facelift 1.8T AMK code of the engine, which bore engine is stock (81mm). What kind of pistons' I must use? In...

I'm worried that when it folds manually, will automatic folding work?

what a system

because someone outside folded one of the mirrors by hand and can it break?

Hello. I have a electric folding mirrors on my s3 8l. I want to ask if they can be folded by hand (manually), or just by the button? Will this damage the mirror motor?

Hello guys! Has anyone done this? If he can say what parts and wiring diagrams I will need??

Hello to everyone. I bought OZ. Ultraleggera 7.5Jx18" ET46 for my S3 8L and I have a 18Z calipers. I know that 18Z calipers from PORSCHE fitting to OEM Ronal Avus 7.5Jx17" ET32 with 20mm spacer, and will the brakes fit with a well-chosen spacer and will I have problems with the fenders? The...

It seems as you say, other opinions?

Hello, everyone. I will restore the rear calipers of my s3 8l. Does anyone know how many mm is the piston of the rear caliper, because I get 2 types: 38 and 41 mm ???

Hey friend, do you have picture on the all car? I'm thinking of installing spacers 25mm front / 30mm rear, because i bought 18Z brembo.

Do you have pictures?

Hello! I bought for my S3 8L Facelift O.Z. Ultraleggera 18x7.5J ET46 with tire size 225/40 / R18. What wheel spacers for front and end wheels will I need?

This engine is not AMK/BAM/APY code. This is my sensor: 1/8NPT. I read this post and this guy say the distance is too short to screw the sensor on top of the oil cooler.... https://wak-tt.com/mods/gauges/gauges2.htm If someone did it to upload photos of how he mounted it. :) Thanks in advance....

Yeah but the size of the cap is M10x1 and the size on oil pressure sensor is 1/8 NPT ? Will the sensor itself fit only with a straight adapter M10x1 to 1/8NPT?