Recent content by Blatzvid

Can someone help? Im really confused, do I need ignitors too or just ballast + xenon lamp?

Hello, I disabled all cold diagnosis with VCDS, but remember you need leds with canbus (resistors) so it does not show any lights error on the dash. Right now I have leds in the license plate and parking lights because Im retrofitting single-xenon headlights, leds on halogen headlight cause...

Thanks for the help, I've already bought the ballasts and they arrived yesterday. Another question, it is mandatory use a ignitor? Or the lights will work with no problem?

Hello guys, so I bought everything to retrofit single xenon but I still need to buy OEM ballasts. Someone knows what are the correct ballasts for these headlights? (they are new and didn't came with ballasts) Left: OEN 8P0 941 029 M or OEN 8P0 941 029 P Right: OEN 8P0 941 030 M or OEN 8P0 941...

Update: The error is gone and now the lights are working again... I didn't do anything :icon thumright:

Mine is a 05 8P SB I dont have a resistor installed, I just removed the original lamp and placed tubular led with canbus. It worked fine since 2017 until this weekend when boot leds stopped working and the warning showed up. I know the leds aren't "dead" because when I turn the lights on, they...

I have c5w led with canbus in my A3 since 2017, yesterday the bulb out warning showed up and I thought that could be one of the lights died. When I came home I noticed that both lights were off, so I stopped the car and turn the ignition and both lights turn on with no problem, but seconds later...

Any help? can these be the cause of the ac not working? The radiator fan doesn't work when the AC is "on" , can it be a pressure problem that don't allow it from starting?

So maybe these 2 faults are not the cause of the ac not working? I've cleared the faults a few times but they showed everytime

Hello everyone, My a/c isn’t working, since I bought the car (2016) it never worked and I haven’t done anything because I use my motorbike during all the summer. At the beginning I recharged the system because I thought that was the problem, but it didn’t work After all this time I decided...

Little update, after I replaced the boost sensor, the car is so far so good, I hope it continues like that

Yes, I have a midline 1K0 953 549 AF

Yes I tried with all kind of speed, above 30kmph I'll try this advice on saturday , if the VCDS dont see the actions what I have to do?

Update: I installed and coded the stalk today and it works, but not all the functions. It activates only if I press down the stalk (lower speed) and the "resume" and "set" functions dont work , maybe my car prefers the vw golf V stalk?

Thanks both of you, I already bought it and the smls too, will install it on saturday :icon thumright: