Recent content by Bignick

Thought i would bite the bullet and speak to Audi. phoned em and asked for a price on replacement consol and he said are you sitting down? £467 + VAT then i would have to pay for fitting so that they could program it to my car! They will not program a part supplied by me because they could not...

Hi all I have recently tried to fix my pixalated screen on my dashboard following various threads, and it did not fix the problem. Next i ordered a new screen off ebay which was £34 free delivery. The advert said it would need to be soldered in by a competant person, so my freind who solders on...

Quick update, the problem turned out to be the sensor, replaced it and no more warnings. The reason the pump was not changed was, funds.

Its the big one that screams at you, its red and fills the whole screen

I've changed my sump and put new oil pick up pipe on 3-4 wks ago, ive had the warning light come on a few times just as ive pulled into my road recently, i have checked levels and they are fine. is it likely to be a dodgey sender or is my oil pump going to want changing? i dont have access to...

Can be done. look on ebay for a packet of Jewellers rouge its hard work but worth it

Hello, removed rear left panel inside, found a round multi-pin connector in its own harness with nothing attached to it??? any ideas

If all your mods were on the insurance, list the prices and tell them you are going to speak to the insurance ombudsman. ive been through all this.

But im hitting the tarmac now! if lowered i'll be taking the pavement to work with me LOL

yes its stupid i lost the front valence off my corrado when i had it, think i should move, The pulsar was lowered so that had to go up on ramps. I just cant deal with lowering cars any more its just not worth the effort.

Well i'll have a look around but ive put some metal plates under my front vallence to reduce scraping as i go onto my driveway.

Thanks for th e advice guys, time for a re think then. Can you not get stiffer springs that don't lower the car?

Hi all, my suspension is standard with new shocks on the front and the only part i've uprated is all the bushes. I cant lower the ride hight as i wont get it up the drive, but i do want to reduce the body roll so i guess its the arb's? i've been thinking that the r32 setup is the way to go for...

mmmm that was the answer i was hoping not to get, i'm sure i put 8mm on there i was going to try a 6mm or even 5mm if i could get it on. thanks.

I changed some of the fuel lines around my fuel rail months ago when I fitted a boost valve. When I took my injectors out to clean them a while back I noticed they appeared to be cracking (they were not cheap cr@ppy ones but they were from halfords.) I tightened all the jubilee clips up and off...