Recent content by Adrian mccoll

Shouldn’t make a difference with wheel size unless I’m missing something ? Your adjusting the hub face so it shouldn’t matter how big or small the wheel is the face stays the same ??

Happy days, what do you mean by everything mate with regards to the polys ? which bushes did you order from cb with the arms ? As there are a couple of options I think.

I’ll swap you my list is ridiculous someone has just put a silver s3 on Facebook that he’s breaking… on the Audi s3 8l owners buy/sell/wanted/advice. His name is James pheby.. may be worth a look ?

Indeed I’ll have to go over it with a magnifying glass see what’s missing

A 2 year update tuffty…. You were in fact bang on she’s now finally back alive and just got home from badger5

Hi I’m about to change my suspension to H&M 25mm shorter springs and bilstein b8 shocks… My question is are adjustable control arms necessary for this setup ? If so is just 1 set enough ? thanks Ade

Evening, I have a rather sloppy gearstick and would like to sort it out and after some reading I can’t make sense of how to go about sorting it completely , I don’t want to adjust side to side as I have previously hit 4th when aiming for 6th but I’d love to shorten it front to back, which brand...

Just messaged you on FB tuffty as I can't upload images or videos on here as the files are too large, rocker cover off and no obvious signs so head off I'm guessing. Still haven't measured down to pistons though as I can't get to the crank bolt until I get the car up on the ramp

Got ya ! Top man tuffty, will check asap and let you know the outcome.. Not that your interested but I will probably need more advise lol

Watch the rod from below with sump off ? What's the best method for turning engine by hand ?

Cheers tuffty, how can I confirm each cylinder is at the top of its stroke ? Just keep tuning engine by hand and record the shortest measurement on each cylinder ? Wheres best to turn engine by hand ? Clockwise or counter ?

Wouldn't a bent rod make the car run rough ? Easiest way to tell by taking the sump off ? Would you still start with rocker cover off ?

Gave the car a little squeeze earlier, maybe 3500/4000revs, pressed the clutch down quite suddenly and the exhaust made a pop which it's only ever done a handful of times. Not sure of this is relevant or by not. Followed by a constant tapping from I believe top end... Tapping is consistent...

What size are these wheels mate ???

Yeah the oil I have for gearbox is from TPS and checked part number against 7zap But on 7zap there’s 2 potential part numbers for original diff oil ? Like in my photos attached ? I think it’s G052145S2 Just need someone to confirm and tell me how much quantity is needed ?