adamss24

Hi there. I have a faulty EDC/ which stopped the injector pump from working. on a 2.5 v6 a4 2003. Diesel bob is the guy to recon that but I cannot find a mechanic to remove and refit and ensure its set up. can you help? based in West Midlands. I am able to arrange the vehicle to be sent for the work.
can you help?

Mash

Hi,
Plz help regarding my AKN 2.5 V6 '02 Passat after Auto to 6speed manual transmission swap
The adaptation code for manual trans. (03012) is accepted but the car won't start:
2 fault codes (01318 ) and (18034)
Put auto trans code again (03011)
Car starts in limp mode, Max 3000rpm
Does VP44 have to be flashed to manual trans too?
I'm really lost.
Thx

Seen you had I fo on Bv43 on a 140bjp as a upgrade what ones the best

Hope you are doing ok Chris, you are missed amongst a load of people who know you to be an honest top bloke, hope things are going well for you and the family, regards Dr Sadiq

hello chris, you are highly recommended on this site, I have some tuning issues with a special project ive built with a 2.5 TDI BFC engine in a military vehicle and wondered if I could bother you with them, cheers, dave

I don't know him personally, but I can tell from his posts that he is an honest person. He probably got caught up in Romania and it will probably take a while until he gets back. But I'm sure he'll be back. I need him too :with an 2.5 tdi)

Just a heads up...Chris has disappeared since taking a £500 deposit off me for work he was to carry out on my A4 cab. From what I can gather he's back in Romania so just be very wary about sending any money over should you manage to get in touch with him. If you do manage to get in touch can you please forward the details of the method you managed to contact him on.

Cheers

Carl

Hello chris, seen many posts from you regarding undertaking engine work and fixing poorly 2.5tdi's

I have one , can I give you a call and chat about maybe carring out some work pal

Thanks Shaun

Hi Chris, it's Jimmy (green Passat).
Have you changed number?
Please contact me.
Thanks
Jimmy

Hi dude. Can you check my post out? I really need some help. I have no idea anymore what to do.
http://www.audi-sport.net/xf/threads/2-5-tdi-strong-knock-no-start.333990/#post-3049422

Hi Chris, I spoke you to back in November regarding VWgolf 58 plate, that needs a cam belt and water pump change. Was slightly busy at the time and couldn't arrange to bring it in. I got a bit more time now and would like to bring it in to have it change; When are you available to make this change? Can you ping me back with your contact number please. Thanks Alex

Thanks Chris for your reply. I would like you to take a look at this issue and book me into your garage if possible. Thx Tony

Hello Chris, Would there be any chance I could contact you? I'm having problems with my Audi 2.0tdi 170bhp 2007 car.
I've already taken it to a local mechanic and he is having problems finding the issue with it stalling.
Thx Tony

hi,sorry to hassle you,as far as i can tell you are the only person to have done what i´m halfway through.
a 1.9tdi(afn motor into a b5 2.5 tdi long story short i had a 98 a4, 1.9 great engine, rust, rust free 2.5 q avant, but 500,000 kms, oil leak from one of the heads and due belts and pump. what do i need to do to connect the engine harness to the car

Hey man, I was hoping I could get some advice. I own a 2001 C5 AKE that needs cams, rockers, etc. I've found a set of used roller heads with solid cams for 700euros. Not sure of the engine code but they are stamped 059L. I could send you pictures if you'd like.
Should i get these roller heads, or go with the kolbenschmidt kit for roughly the same money?
I'd bring my ride to you, but I don't live in the uk

Hello Adam. Just wandering if I could ask a question about a vp44 diesel pump?
After reading about the pumps and their faults, I'm Looking at an inspection, rebuild and replacement ecu. If the ECU is replaced, can it plugged back in or does it need some sort of coding? If so, Is this a difficult job and how much might it likely cost?
I'm in south west wales so can you recommend any good guys?
Thanks very much.

Hi adamss24 i have a 2002 audi a4 2.5tdi aym which needs the cam belts doing+stat+pump how much would it be to do this job if you can. many thanks in advance

Hi Chris, im in a bit of a situation here..would you be available at some point this week to do a cambelt job on A6 AKE? Front will be off, coolant drained and ready to access the belts. I got the parts ready too, Contitech belts etc, just picking up a water pump tomorrow morning in Leatherhead. I live in Reigate RH2 8QZ. Many thanks, Isaac Marques

How much for the wheels mate

Hi there,

I 've got a 2004 A4 1.8T Petrol that needs cambelt/waterpump replacement... surrey area... would that be possible? Thanks!

Hi just looking for some advise on my 2.5 v6 tdi engine suspected timing problem and maybe a price to re do the timing

Hiya mate, would like to give you a call if that's ok discuss my 2.5tdi Quattro b6 on what we were discussing on the post I posted.

Thanks

Gt

Just wanted to say huge thanks for the accurate and invaluable info you gave with regards my car. I got a pump s/h and it went in as you said it would- genius! It has literally saved the car. Best wishes Tony Ives

Hi Adamss24, don`t know if you remember me I sold you a black audi a4 2.5tdi Quattro avant a few years back now, it was on W reg(2000) full black leather, had the SRE racing clutch fitted also !

Just need some advice on another audi a6 2.5tdi Quattro I have with 180 hybrid and PP683 nozzles, If you dont mind giving me a call on 07533607417 to have a quick chat at your convenience.
Thanks

Dear Adamss24. I hope you don't mind me contacting you:) I am a new member, a few hours. I have a beloved audi 2.5 tdi b5 c2000 that has a broken injector pump. I am wondering is it possible to fit a sh pump to these, or even fit an edu to my original pump? BTW it went on the way from an expensive MOT

Hello.

Long story short, I have ** my injection pump. I currently have the AFB engine with AFB ecu. Does an injection pump from AKE will fit and work on my car?

Regards from Romania,
Paul

hi - I would be over the moon if I could speak to you regarding my 05 2.5 v6 tdi (BDG ENGINE 100,000 miles) its had a full recon injection pump,.. it does run but pours out with white smoke and just doesn't sound well when its idling. injectors have been checked and are ok, compression is ok. timing has been checked and apparently its ok?? dunno what to do now..

Hi, thanks for your reply.
i am not after huge power, am after a nice drive in a "sensible" car, my car is the 2.5tdi quattro, with god know what engine that's apparently been reconditioned.
What sort of prices am I looking at for a once over and a remap?

hello adamss can you send me your map from audi a4 1.9 plees help my address bezvezebee8@gmail.com

Hi, you got any rear brake upgrades for the a6 c5 2.5tdi for sale?

I would like to speak to you about my current project I'm planning (A3 TDI QUAT BMN). As it stands now I'm putting in a GT2260+shortmanifold+S3 fmic +4 bar MAP. If you could give me a price for it that would be great, Nick

Hi,
so how much are you looking for the engine and what's included? thanks

Hi Chris how much for a rear crank seal on 2.5tdiquattro cheers jon

Hi. I own a 2001 allroad 2.5 AKE which has this problem (not my video but same sound https://www.youtube.com/watch?v=FcSj1aZcL7E&list=FLRbwm9rSep7fyZ5Xmrss_3Q&index=4 )

I am preparing for the camshafts job.

Would you have any procedure/DIY instructions ? Even for the timebelt setting woud be great.

it would be so much help for me, I am an engineer but a newbie into hard mechanics :)

kind regards

Swaran

Chris i need my timing belt doing easter time could you let me know how much and also what sort of time scale you need the car for ?
Satty (Leeds)

Hi Chris,
I need to replace the timing belt on my Audi A4 2.5 quatro sport 04. I've been searching on the net as well as getting quotes from local garages & came across one of your post from Jan13.
I generally repair my car myself but cannot do this one. Could you please let me know if you still provide this service? If so, how much would you charge and when could it be done? Thanks

Thanks, can you suggest anything hat would increase the power, thanks

Hi did you get my post, what price are you looking for the set
Kevin

Thanks Chris, need anything new old, to get me going, What are you looking for them?