- Joined
- Apr 8, 2009
- Messages
- 438
- Reaction score
- 3
- Points
- 18
I have just bought a set of genuine 18" S4 alloys for my S3. I'll be using hub adapters to fit them, which will also double up as spacers so I'm killing two birds with one stone.
Can someone confirm the type of adapter I'll need from this list?
https://www.dpmperformance.co.uk/audi-s3-8l-c-2803_2804_2812.html
I know I will need to convert PCD 5/100 to 5/112 but I have no idea about bore sizes or how much width I'll need?
If I was just going to buy spacers, I'd be looking to go 20mm on rear and 10mm up front.
Can someone confirm the type of adapter I'll need from this list?
https://www.dpmperformance.co.uk/audi-s3-8l-c-2803_2804_2812.html
I know I will need to convert PCD 5/100 to 5/112 but I have no idea about bore sizes or how much width I'll need?
If I was just going to buy spacers, I'd be looking to go 20mm on rear and 10mm up front.