Hi, just recently installed a FL camera (8V0827566B) into a PFL A3 saloon, it works just fine, VCDS shows that camera was already calibrated, however, checking with the calibration device (VAS 6350) I can see that lines are a little off (calibration was placed centered relative to the car bumper and at 1500mm from the center or each wheel):
Using VCDS 18.9.1, I tried security access code 22351/20103 in module 6C to try to get the adaptation channel 5 in order to calibrate but with no luck, is my code wrong? Or cant this camera be calibrated using VCDS? I saw also that basic settings shows camera calibration, but menu does nothing.
Thanks in advance for any help!
Using VCDS 18.9.1, I tried security access code 22351/20103 in module 6C to try to get the adaptation channel 5 in order to calibrate but with no luck, is my code wrong? Or cant this camera be calibrated using VCDS? I saw also that basic settings shows camera calibration, but menu does nothing.
Thanks in advance for any help!