I do too, but shall be the first to admit that it does cause problems when one encounters the highland pothole. Thinking coilovers and about 2" higher.I do like that vodykit
Sent from my SM-G930F using Tapatalk
Yep. Put them on both my Audis.I just fitted blueline jom Coilovers. 200 quid but really good for the money
Sent from my SM-G930F using Tapatalk
I may have to resort to putting it the garage instead, well after I have made space in it..lol
Drove North Coast 500. Nice day, amazing views and good roads for overtaking campervans
Sent from my ONEPLUS A6013 using Tapatalk
Thought it was time to ditch the scabby yellow paint on my calipers. Thought anthracite and silver might make it a bit smarter but not settled on final colour yet.
After:-
View attachment 190906
I like the S-Line Caliper springs!! Can you tell me where you purchased them from please?
Few weeks ago fitted the Pioneer AVIC-Z910DAB but with few issues...
1. Upon headlight switch being turned on a whining noise is audible from the speakers.
2. I can't get it to display jpeg pics.
Other than that SQ is much better than the original unit.
What this unit needs is real speakers, amplifiers etc and not Bose!
From memory I think you can, my previous Pioneer would let you add a new theme other than the pre installed ones,it probably mentions it in the manual , but the manual is a tad long.Hello Rob, yes mate very minimal but I guess I'll have to ignore it, mine comes on as soon as I turn it on regardless of what source is on.
Can themes be changed on these?
Few weeks ago fitted the Pioneer AVIC-Z910DAB but with few issues...
1. Upon headlight switch being turned on a whining noise is audible from the speakers.
2. I can't get it to display jpeg pics.
Other than that SQ is much better than the original unit.
What this unit needs is real speakers, amplifiers etc and not Bose!
Actually the canbus does a bit more than that, it gives signals to the oem radio to work, turn lights on handbrake signal and a few other signals. When you install an aftermarket radio you will need the canbus decoder.Not sure , but the B7's have a very limited canbus anyway compared to B8's so if so, it will only be for basic steering wheel functions.
In my case none as my RS4 fbsw doesn't have those functions over HU control.
The canbus decoder has 4 inputs, 12v, Gnd, can high and can low, it outputs 12v Acc, light switch, reverse switch speed and handbrake signals needed to for an aftermarket HU to function, it also has 2 outputs RX and TX that go into the HU for steering wheel functions, so basically the Steering Wheel function is decoded by the HU. The decoder is also designed to minimize the electric noise.agreed , but they are mostly to do with the steering wheel multifunction and audio.