Tinny exhaust on start up

[RS03_SEN]

Hi.
First thread on here, just signed up.
I have a 2015 rs3 and when I start it, the exhaust sounds really tinny/rattly sort of.
Goes away when I select dynamic mode but a couple of people have commented on it and I was wondering if it’s normal or not?

Thanks.

 

[jaysrs4]

Google is your friend...You'll find more pages than the frekkin Bible on it.

 

[sve170]

Hi.
First thread on here, just signed up.
I have a 2015 rs3 and when I start it, the exhaust sounds really tinny/rattly sort of.
Goes away when I select dynamic mode but a couple of people have commented on it and I was wondering if it’s normal or not?

Thanks.

Totally normal, only lasts for approx 15 sec on cold start-up, as you mentioned if it’s bugging you just change to setting to Dynamic.


Sent from my iPhone using Tapatalk

 

[RS03_SEN]

Totally normal, only lasts for approx 15 sec on cold start-up, as you mentioned if it’s bugging you just change to setting to Dynamic.


Sent from my iPhone using Tapatalk

Thanks. I always drive in dynamic anyway, just wanted to make sure nothing was wrong.


Sent from my iPhone using Tapatalk

 

[Terminator x]

Not usually a PFL "thing" eg just the FL afaik and down to warming up the cats or something. Never had it on my PFL.

TX.

Sent from my BBB100-2 using Tapatalk

 

[D0C]

Thanks. I always drive in dynamic anyway, just wanted to make sure nothing was wrong.


Sent from my iPhone using Tapatalk

Shouldn’t rattle on your PFL. Perhaps a loose heat shield that’s resonating?